Old Oct 26, 2004 | 01:05 PM
  #5  
elementalwindx's Avatar
elementalwindx
Registered User
 
Joined: Apr 2004
Posts: 630
Likes: 0
elementalwindx has disabled reputation
Default Re: For you smart guys like cosmo, fc, wagz, philip, and whoever else..

Originally Posted by cootees
Eh, Greg. I don't know about that. I see bad things happening.

From driving around the water is going to be splashing all over the place and getting into the line towards your bov. I remember your bov also leaks so when in throttle it could pull some of that excess water up under your bov and through your tb? eh... like I said bad things.

Unless you put a strong checkvalve to keep water from escaping the canister then I do not know how well it would work. On a side note.. in order to get the mist you are looking at then the canister would need to be pretty full.

However if you want my thoughts on it then get an oversized catch can.. preferably one made out of metal with the in and out hoses both coming into the top of the canister. Add a checkvalve to the line connected to the bov so that when you the pressure is released into the canister the valve will close shut and the air will be forced down onto the water splashing the water around and out of the other line.

Make sure you reduce the size of the lines so you can have adequate(sp?) pressure. The whole thing still sounds pretty dangerous.. and I wouldn't want to try it.

Wouldn' it be more fun to just spray people with water guns?
I have those 3 valves from the charcole exhaust part of my dsm. I think one of those things is a check valve. My problem is finding the tubing to go from BOV tube size to small windshield washer tube size. any ideas? I like the check valve idea tho.