Old Feb 14, 2003 | 02:59 PM
  #1  
tecnic1's Avatar
tecnic1
This is going to spo
 
Joined: Nov 2002
Posts: 1,572
Likes: 0
From: portsmouth
tecnic1 tecnic1 tecnic1
Default help me sort the teg/are there any shops in area that can corner weight my car?

I got the ground control coilovers on the teg(450f/500r), and it's all screwed up now.

-turning left I'm pretty sure the front is bottoming out under heavy throttle..
-It still won't rotate with anything short of a full lift...
-It dives really hard and gets really squirrley under brakeing,
which I expected, but I'm still going to try to chase that down

I have the ride height set at 4.5 inches to the jack point front and 5 inches to the jack point in the back, which is exactly what I measured it as with the H&Rs. I think I'm going to try raising the front .5 and lowering the back .5 the left front.
I'm thinkin' I'll start with cornerweighting and alignment, and if it's still screwed up, maybe try some different rates....
oh, and if I lower the right rear, will that get some of the weight off the front left, where my fat assw is parked until I get it corner weighted?