Originally Posted by
tech2149
b16a and b18c1 same specs.
Valve Clearance
Notes
Valves should be adjusted only when the cylinder head temperature is less than 100°F (38°C).
Clearance
Intake: 0.15 - 0.19 mm (0.006 - 0.007 inch)
Exhaust: 0.17 - 0.21 mm (0.007 - 0.008 inch)
Tighten Adjuster Locknuts to 20 Nm (14 ft.lbs.)
specs. from alldata
That's correct!
BTW...do not expect alot of power from a set of GSR cams. They are only a
slight bit larger than a set of B16 cams. If you want a set of mild stage 1 cams for a stock to very mild build with little or no tuning, then a set of ITR or CTR cams would do you a Butt Ton (slightly more than a metric ton) more then that of the GSR or B16's cams.