Hey, it's Brett here. I have seen you on B15sentra but, I wasn't sure if the "vb" in your name stood for Virginia Beach. Well, anyway welcome to the board!

Ok, now on the camber. I also got my alignment at Bert's for $50 and he told me I had around 1 and a half degree's of negative camber up front with my car lowered were it is. There are no camber plates on sale for our cars yet but, I have seen a set on the Speed Channel Sentra so some should be available one day.

Now, if you want more camber, say around 2-3 degrees negative you can slot the struts which involves taking a dremmel to the mounting points of the front stuts in order to get some more camber. I plan to be doing this soon when I get my KYB AGX's and when I install them I want to slot them to around 3 degrees. Yes, I do need 3 degrees because I am still wearing out the outside edge of my new tires pretty bad even with 52 psi, so I feel that 3 degrees will save my tires in the long run. You really should talk to Steve (98sr20ve) about this because he is going to be the person doing mine and he is the Sentra guru around here.

He will both be at the Corvette autocross this weekend so feel free to ask. Oh, I'll give you a ride along also so you can see what your GC's will do! What rates are you going to get?

Watch out for the Spec V hater's on this board! Not, on the autocross forum though, they all know better. Just every where else. I think there is one other Spec V and then there is SERious with a SE-R.