if you have the rods look on the side of the rod and there should be a number on the rods, (1-4) half on the top and the other half on the bottom to make the full number. this is one portion of finding the right size bearing

now for the crank to find the letters for the other portion of the code. on the crank there are four letters,each is stamped right by the rod journal

if you didnt number the rods when they came out you shoudl be alright just designate all the rods with one journal and take the letter and the number on the rod to make a code.

lets say all your rod journals on the crank have th letter c
and all yoru rods are 3's

this gives you c3 for all yoru rods bearings

here is the chart to tell you what color honda bearings you would use
1 2 3 4
a red pink yellow green
b pink yellow green brown
c yellow green brown black
d green brown black blue

i hope that wasnt to complicated if i could post some pics it might help
the same goes with the main bearings also

let me know if i can help anymore