Chahonda, you can make an elecrolizer in your garage in a couple of hours. use stainless mesh like the bug screens in your windows, you can layer them, you can roll them up etc, it all works. now one set of screens get the positive voltage. The other set gets the negative voltage. Make sure the screens don't touch each other. Use DC current. I set mine to 2 Volts. I ran it through a "dimmer" switch this allows the voltage to be pulsed. It increases the production of gas. A little playing with the voltage and dimmer setting will yield the best results for you. You will also need a catalyst, in the water you submerge the screens in. You can use sodium, lye, baking soda etc. It is only there to make the water carry the current. seal the top. Put a hose to it. feed the hose directly to a vacume port on the intake. I would assume above the butterfly but trial and error are the key here. USE A SPARK ARRESTOR!!!!!!!!!!!!!!!!!!! Hope this helps. Good luck. If I can help you, let me know.