View Single Post
Old Jan 18, 2008 | 02:05 PM
  #1  
madsteez's Avatar
madsteez
Ohhh Snap
 
Joined: Oct 2007
Posts: 4,535
Likes: 0
From: Virginia beach
madsteez madsteez madsteez madsteez madsteez madsteez madsteez madsteez madsteez madsteez madsteez
Default Ran into a little wiring issue.

I just put on a new 62mm throttle body and since then my car will not idle.it did this awhile ago before i got it tuned and even then they had to make it run rich at idle for it to idle when warmed.Now iv noticed that if i have the tps unplugged,then it idles perfect,i just get the annoying bucking when cruising.

So now for the technical questions.

What sensor is the one that tells the ecu that the car is up to normal operating temperature and its safe to run out of loop mode.(the 2 wire plug on the cylinder head,the 1 wire plug on the cylinder head,or the 2 wire plug on the cooliant rail?)

Second,does anyone know of the voltage on a honda tps sensor,like which color wire should have which amount of voltage at normal operating temp,and when its cold.

NOTE:i have changed out tps's about 3 times and its the same with all 3.I know the quesitons are very technical and i may not get an answer but its worth a shot.

PLEASE IF YOU KNOW POST UP INFO.