well i think he is talking about the rear. there is no front mount. if you have a stock mount on the rear it prolly dont line up good so you are prolly putting to much stress on it and if its stock then its prolly junk. the tee bracket on the rear are all the same as far as b series engines. if your mount is worn out then it will twist the engine to the front and the rear. but if you put a solid one on the rear then its not going to twist at all. then rear mount hooks to the cross member. the front cross member isnt really a supporting member. its there just to hold the radiator. and your torque bars but that is something else.