hey i went to turn my headlights on when i left work today and went to turn my headlight on and my passenger lowbeam light wasn't on so i was assuming the buld just blew. so i havei tried anothr buld and still nothing. I then check the fuse and it's blown, put a new one in and it blows as soon as i turn the headlight's on everytime now i know that usually means a short in the wiring i check the red and black wire that runs from the socket back to where the loom starts and there's no cuts or anything in either wires. so then i wire up the headlight socket directly to the battery red wire to battery and black to a ground with a inline fuse on the red wire and try to turn the lights on and it blew the inline fuse and still no light. does this mean that the actual socket is bad?