Anthony
Virginia Beach
PM me or text 904-422-6402
As some may know, my Civic Si is totaled but most of the car is salvageable. I am posting a list of what I am gonna be parting out of this car just to see who all is interested. I should get the car back in a little over a week or so once the claim gets finalized. So here it goes.
***EVERY PART IN THIS LIST HAS SEEN ROUGHLY 900 MILES***
***ALL MY PRICES ARE FIRM SO DONT ASK FOR A LOWER PRICE OR TRADES, THANK YOU***
Here are pics of the parts before they were installed to get a rough idea until i pull the motor out
http://www.honda-tech.com/showthread.php?t=2367730
LS/VTEC Longblock - NO I WILL NOT SELL ANYTHING SEPARATE
Everything has about 900 miles on it. Doesnt burn oil, no blow by. She's solid!!!
B18B Block stock sleeve 81.55mm bore by Abacus
Polished and Balanced LS Crank
Clevite Bearings
Eagle Rods
CP 9:1 Pistons Compression is 185-187 across the board
Type R oil pump
GSR Water Pump
GSR Timing Belt
GSR Headgasket
LS Thermostat
GSR HEAD
GSR Cams
Skunk 2 Cam Gears
Supertech Valvetrain and Valves
Stock dizzy with new coil and rotor
ARP Headstuds
$1900 FIRM not a penny lower - I spent $2600 building this NOT including my labor
-------------------------------------------------------------------------------------------------------------------
AFI Turbo Kit I will part out. Not sure on prices yet.
$850 - AFI Top Mount Manifold
750 - T3/T67 H.O with P trim wheel .63AR
250 - 3" Downpipe with flex section / testpipe to fit kteller exhaust
200 - Intercooler 28x11x3
30 - All couplers and t-bolt clamps
$2,650 FIRM!
-------------------------------------------------------------------------------------------------------------------
280 - RC 1000cc Injectors
60 - BDL Fuel rail
80 - Feed/Return Fuel line kit
100 - Aeromotive FPR 13109
20 - NGK wires
20 - Fast Turbo vacuum manifold
50 - Golden Eagle Sandwich plate adapter with fittings
300 - KTeller Full SS 3" Exhaust for EK
10 - B&M Fuel pressure gauge
250 - Edelbrock Victor X Intake manifold 70mm
140 - Skunk 2 Throttle Body 70mm
300 - Hasport STK mounts
40 - Autometer 3 pod pillar
40 - GM 3 bar map sensor w/pigtail
300 - Competition Clutch 0420 with upgraded pressure plate
80 - Exedy 8-9 lb flywheel
50 - MSD Blaster Coil and Cap
30 - Autometer Oil Pressure Gauge
50 - Skunk 2 Shift Knob
650 - Quaife LSD
150 - GSR tranny with 4.7 FD - needs new 1-2 sleeve set.
I may have more thats not listed but this is what I have so far.