Thread: only 6 bolt holes in the light fly wheel for the pressure plate
View Single Post
Old Oct 11, 2009 | 04:55 PM
  #2  
MORE IMPATIENT's Avatar
MORE IMPATIENT
DESTROYS DONUTS !!
 
Joined: Nov 2002
Posts: 13,275
Likes: 0
From: the seed has sprouted.
MORE IMPATIENT MORE IMPATIENT MORE IMPATIENT MORE IMPATIENT MORE IMPATIENT MORE IMPATIENT MORE IMPATIENT MORE IMPATIENT MORE IMPATIENT MORE IMPATIENT MORE IMPATIENT
Default Re: only 6 bolt holes in the light fly wheel for the pressure plate
alright hold up, clarify real quick. are there 6 bolts holding the flyhweel to the crank.

or

6 bolts holding the pressure plate/clutch disk to the flyhweel ?

If there is 6 bolts holding the flywheel to the crank, I WOULD be worried and would not start the car, there should be 8. If there is 6 bolts holding pressure plate/clutch to flywheel, than your fine. As long as you torqued everything to spec.



Correct amount for an integra.

There 8 bolts for flywheel to crank

There is 6 bolts holding pressure plate/clutch disk to flywheel.
Last edited by MORE IMPATIENT; Oct 11, 2009 at 05:02 PM.
Reply