my buddy has a press. detailed description: (i'm drunk, so please excuse the sarcasm/idiocy)
1. remove wheel, this involves the use of a 19mm socket, or tire iron.
2. remove the 2 14 mm bolts holding the caliper on
3. remove the 2 brake pads
4. remove the 2 bolts holding caliper bracket on. you may have to remove caliper e-brake cable pin thing
5. remove the 32mm bolt holding on hub assembly.
6. i forgot, but this should get you started

make sure not to strip the 2 philipps head screws. drillin them out sucks balls.... ask me how i know

hope this helps