Sub Box question
#1
Taking the shot
Thread Starter
Join Date: Nov 2003
Location: Trolling Off Topic
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
Sub Box question
Hey getting ready to build a sub box for my truck and its kinda new territory for me. What kind of wood is best, and im assuming liquid nail and something else to seal the box. info would be appreciated.
#3
Taking the shot
Thread Starter
Join Date: Nov 2003
Location: Trolling Off Topic
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sub Box question
Originally Posted by V8 Hunter
3/4" MDF liquid nail and some brad nails
is the liquid nail enough to seal the box or hould i use silicone too?
#4
Handling is Key!
Join Date: Jul 2003
Location: Virginia Beach, Virginia
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sub Box question
Originally Posted by QwanSanchez
is the liquid nail enough to seal the box or hould i use silicone too?
#5
Taking the shot
Thread Starter
Join Date: Nov 2003
Location: Trolling Off Topic
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sub Box question
Next question, the 12s im runing are the JL Audio W0. on the site it says the best Sealed Enclosure Range: 1.00-1.75 cu.ft. (28.3-49.5 liters)
what exactly does that mean? also it says continues power handling 125 watts, so should i be running 125 watts to each sub?
what exactly does that mean? also it says continues power handling 125 watts, so should i be running 125 watts to each sub?
#6
Handling is Key!
Join Date: Jul 2003
Location: Virginia Beach, Virginia
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sub Box question
LxWxH / 1728 with give you cu.ft. For example if your box is 14"L x 12"W x 12"H = 1.36 cu.ft. If the woofers require 125 watts RMS then yes thats what you should push to them.
#7
Cut,it,out
Join Date: Jul 2003
Location: York County / Blacksburg
Posts: 1,475
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sub Box question
Originally Posted by V8 Hunter
LxWxH / 1728 with give you cu.ft. For example if your box is 14"L x 12"W x 12"H = 1.36 cu.ft. If the woofers require 125 watts RMS then yes thats what you should push to them.
#8
Re: Sub Box question
JL does underrate their subs i ran closer to 200 on my 10WO's but i would recomend you talk to stereo shop since im not familiar with 12WO's but yeah 3/4 MDF, liquid nails, and a nail gun and a lil upholstry will seal it up nicely.
#9
I'm a 564 veteran
Join Date: Aug 2003
Location: connecticut
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sub Box question
if you want to save a little wieght you can use 5/8" particle board, i used MDF and it keep splitting the wood. so i bought particle board wood glue and silicone for some extra sealent. i used sheet rock screws instead of nails, but thats just what i'm used to. i would recommend building a ported box(just go by the specs on the site)imo its better than a sealed box