What size turbo should i run on my d15??
#22
Slowest HRC Member
Join Date: Jul 2007
Location: Hampton Roads
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Re: What size turbo should i run on my d15??
I appreciate the link,and unfortunately as it may seem i need a cheap route to my problem.I have an 1100 dollar lawyer fee and i was not expecting my turbo to crap out.
Im very happy with my turbo size now but i cant not find anything remotely close to it without the code.
Are all block off plates the same,like universal or would i have to find one particulary for the turbo i have.Ive never dealt with turbos so im not sure on sizeing and specs of them etc etc.
Would the super 60 spool quickly?60 series sounds a bit extreme.
Im very happy with my turbo size now but i cant not find anything remotely close to it without the code.
Are all block off plates the same,like universal or would i have to find one particulary for the turbo i have.Ive never dealt with turbos so im not sure on sizeing and specs of them etc etc.
Would the super 60 spool quickly?60 series sounds a bit extreme.
#24
Slowest HRC Member
Join Date: Jul 2007
Location: Hampton Roads
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Re: What size turbo should i run on my d15??
http://cgi.ebay.com/ebaymotors/Honda...2em118Q2el1247
Ebay Turbo
46 Trim T04E.
Exhaust side is smaller than a Stage 1. Very small in fact. About 56 mm. .63 A/R 5-bolt.
It's good for about 10 psi. Anything over that could create a surge problem. (Probably could push that a psi or two, but the exhaust side is very small, and will spool well, but not flow great because of it. For the range you're looking, it's a good, cheap choice. There's 4 different suppliers that carry these, and you can get the turbo seperate from any of them for less than $200.
I don't necessarily like Ebay turbo's, but only pushing about 10 psi....and looking to do it on a serious budget....might be a decent option.
Ebay Turbo
46 Trim T04E.
Exhaust side is smaller than a Stage 1. Very small in fact. About 56 mm. .63 A/R 5-bolt.
It's good for about 10 psi. Anything over that could create a surge problem. (Probably could push that a psi or two, but the exhaust side is very small, and will spool well, but not flow great because of it. For the range you're looking, it's a good, cheap choice. There's 4 different suppliers that carry these, and you can get the turbo seperate from any of them for less than $200.
I don't necessarily like Ebay turbo's, but only pushing about 10 psi....and looking to do it on a serious budget....might be a decent option.
#25
Ohhh Snap
Thread Starter
Join Date: Oct 2007
Location: Virginia beach
Posts: 4,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: What size turbo should i run on my d15??
http://cgi.ebay.com/ebaymotors/Honda...2em118Q2el1247
Ebay Turbo
46 Trim T04E.
Exhaust side is smaller than a Stage 1. Very small in fact. About 56 mm. .63 A/R 5-bolt.
It's good for about 10 psi. Anything over that could create a surge problem. (Probably could push that a psi or two, but the exhaust side is very small, and will spool well, but not flow great because of it. For the range you're looking, it's a good, cheap choice. There's 4 different suppliers that carry these, and you can get the turbo seperate from any of them for less than $200.
I don't necessarily like Ebay turbo's, but only pushing about 10 psi....and looking to do it on a serious budget....might be a decent option.
Ebay Turbo
46 Trim T04E.
Exhaust side is smaller than a Stage 1. Very small in fact. About 56 mm. .63 A/R 5-bolt.
It's good for about 10 psi. Anything over that could create a surge problem. (Probably could push that a psi or two, but the exhaust side is very small, and will spool well, but not flow great because of it. For the range you're looking, it's a good, cheap choice. There's 4 different suppliers that carry these, and you can get the turbo seperate from any of them for less than $200.
I don't necessarily like Ebay turbo's, but only pushing about 10 psi....and looking to do it on a serious budget....might be a decent option.
Im really considering that one.
#26
Coastal Carolina U
Join Date: Aug 2005
Location: Conway, SC
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: What size turbo should i run on my d15??
http://cgi.ebay.com/ebaymotors/Honda...2em118Q2el1247
Ebay Turbo
46 Trim T04E.
Exhaust side is smaller than a Stage 1. Very small in fact. About 56 mm. .63 A/R 5-bolt.
It's good for about 10 psi. Anything over that could create a surge problem. (Probably could push that a psi or two, but the exhaust side is very small, and will spool well, but not flow great because of it. For the range you're looking, it's a good, cheap choice. There's 4 different suppliers that carry these, and you can get the turbo seperate from any of them for less than $200.
I don't necessarily like Ebay turbo's, but only pushing about 10 psi....and looking to do it on a serious budget....might be a decent option.
Ebay Turbo
46 Trim T04E.
Exhaust side is smaller than a Stage 1. Very small in fact. About 56 mm. .63 A/R 5-bolt.
It's good for about 10 psi. Anything over that could create a surge problem. (Probably could push that a psi or two, but the exhaust side is very small, and will spool well, but not flow great because of it. For the range you're looking, it's a good, cheap choice. There's 4 different suppliers that carry these, and you can get the turbo seperate from any of them for less than $200.
I don't necessarily like Ebay turbo's, but only pushing about 10 psi....and looking to do it on a serious budget....might be a decent option.
#27
Ohhh Snap
Thread Starter
Join Date: Oct 2007
Location: Virginia beach
Posts: 4,535
Likes: 0
Received 0 Likes
on
0 Posts
#28
Slowest HRC Member
Join Date: Jul 2007
Location: Hampton Roads
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
#29
Re: What size turbo should i run on my d15??
smh.....thats why they make freaking 5 bolt plates that cover over the damn hole and weld ya down to it...and i vote garrett t3 super 60 also.
#30
Turbo VTEC-E
Join Date: Oct 2004
Location: Memphis
Posts: 1,520
Likes: 0
Received 0 Likes
on
0 Posts
Re: What size turbo should i run on my d15??
I blew off the whole "DON'T CHEAP OUT" coment for a good while but then I listened and it was worth it.
Just save the cash u have and any extra that u might come across and find something good localy used. YOU WILL SAVE MONEY,WRENCH TIME AND HEARTACHE!!!!!!!!!!!