David S12

Gonna be dope!

David S12

ordering my mounts today then time to source some i/c piping to start mocking up what i need welded, ill have it over at a friends shop hopefully soon for that once the motors in, then i can measure/take my 1 piece from my s12 back to get it modified to


progress on this sr s12 im helping out with, the bay should be done this weekend.. some welding/sanding to get it back to being clean

David S12

awaiting motor mounts

cleaned trans


this swap ran fine before in my 200, so should have no issues on startup


mounted i/c nice,stiff & level

David S12

waitin on motor mounts to come in!

repaired some front end damage on my dd s13


dope adjustable s12 office chair i made


progress on this sr20 s12, bay is finished!! me & a buddy have been working on his car, im just lending him garage space/giving ideas/doing some welding for him

repaired some holes from where the i/c piping went, it was all hacked up

primed bay

lime splash!

Matey

<3

David S12

mounts came in,


turns out they dont fit 100 percent, on the passenger side mount 2 of the holes didnt line up so i had to redrill one, and slot the other to make it fit.. the transmission mount might need some modification too from what i can see.. WHATEVER.. made it work.

some pics of the install, brings me a smile, im the dude on the left with the blue shirt. had some friends come over to avoid scratching shit up.







i had to put 2 hockey pucks in between the mounts and the subframe for a good fit

David S12

made my trans mount solid, didnt have a rubber mount anyways



need to measure and take my 1j s12 driveshaft back to driveline to mate with the stock rear s14 2 piece


great rad clearance (ka koyo), will be making a aluminum shroud & fan setup


shifter extension puts it right where i need it, sweet


ill start mocking the piping up when i find or buy a kit to mock up

David S12

heres part of my build thread for the day

bay is pretty much done minus the piping needs to be redone & so does the intake




race car trash lol


side view


relocated fusebox, still in the process of bringing the headlight wiring back to the headlights, this gives me room for a intake on the other side from where i had it down where the stock battery goes




using my in house, lol.. steel fan shroud for a bit until i get some money right, this time though a koyo radiator and sealing all the seams will give me some better cooling action, i sealed the fans to the shroud also.. ive got a 61.C mishimoto thermostat also


heres my intake for now, if i have leftover piping after i redo the i/c piping ill do this in aluminum





LIKE!! on nexen @ facebook i need tires for hyperfest toyota treats me poorly in pay
me drifting my DD at ods a few weeks ago

http://www.facebook.com/NEXENTIRE
link to pic
http://www.facebook.com/photo.php?fb...type=1&theater

Fabrik8

Please remove the hood spacers. Please.

David S12

no, sorry bro...