marlinspike

Hmmm. I don't think I'll be able to make it to this one. I still don't have my suspension parts, let alone have them installed. Are there more circuitcrosses throughout the year?

getfast

Tentatively March and July, as shown on the schedule...

Blown_xa

Upgraded parts? Why not run it as is? Im running with a clutch that slips, nothing stops me!

getfast

The Feb 21 Circuitcross has been postponed until Sun Mar 28.

Reg for the new event will be here starting two months prior (i.e. middle of next week):

https://www.nasaproracing.com/event/1034

s13

NOOOOOOOOOO that was gonna be my bday present

FamousTLB

This might be a stupid question as I have not covered the rulebook yet, but is weight ballast allowed for Circuitcross? I don't want to have to bump up a class because of weight reduction, I'd rather just use ballasts to recover whats lost.

getfast

Sure. The rule is:

"All ballast shall be solid metal such as steel, lead, or uranium, and consist of a minimum of five (5) pounds per piece. Each piece should be bolted in place with through-bolts, fender washers, and a locking-nut / system (e.g. jamnuts, Nylox, etc.). All bolts should be grade five (5). There should be at least one 3/8” diameter bolt for every ten (10) pounds of weight (e.g. 20 pound block uses two bolts)."

FamousTLB

Thank you sir, I'll plan on being in attendance.

marlinspike

Because right now the engine is about 5 times as fast as the suspension, and that just seems like a bad idea for running all out on a track. Also, my two lifters that were took a few seconds to pump in the morning now appear to be getting much worse very quickly. I have new ones on the way but who knows when I'll have them in. We'll see. If I make it, it'll be a later entry.

getfast

Registration for the Mar 28 Circuitcross is now open at the link above.