Post a pic of your offroader/4x4.
04-09-2010, 01:45 AM
#611
gone
Join Date: Feb 2010
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post a pic of your offroader/4x4.
nice rigs, here's mine if you didnt see my post...
couple years ago...
then...
only piece of glass that survived haha
During repair....
little added safety...
finished product
couple years ago...
then...
only piece of glass that survived haha
During repair....
little added safety...
finished product
04-09-2010, 05:15 AM
#613
_______
Join Date: Aug 2003
Location: ORF
Posts: 5,498
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post a pic of your offroader/4x4.
Saw one that looked just like that for sale on there and the add said it just needed a engine.
Im picking mine up today after the guy has the breathalyzer taken out
04-09-2010, 11:43 AM
#615
_______
Join Date: Aug 2003
Location: ORF
Posts: 5,498
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post a pic of your offroader/4x4.
Thats awesome. Yea according to the owner of the one I bought "It needs a transmission. Its stuck in 3rd gear."
He never thought to check the fuse for the TCM. Fuse blew putting the transmission into limp mode
Go a good deal on mine too haha
He never thought to check the fuse for the TCM. Fuse blew putting the transmission into limp mode
Go a good deal on mine too haha
04-11-2010, 09:04 PM
#616
ig oggggg
Join Date: May 2008
Location: newport news
Posts: 4,981
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post a pic of your offroader/4x4.
you plan on doing anything to it?
04-12-2010, 08:40 AM
#617
_______
Join Date: Aug 2003
Location: ORF
Posts: 5,498
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post a pic of your offroader/4x4.
Not anytime soon. For right now its getting a cooler/rod rack on the front and some body work before paint.
Later on when its time for new tires Im gonna go with some 35" or 36". May have to do some trimming to fit the 36"s though.
Its only a beach truck so no worries on flex. Just turning radius.
Later on when its time for new tires Im gonna go with some 35" or 36". May have to do some trimming to fit the 36"s though.
Its only a beach truck so no worries on flex. Just turning radius.
04-16-2010, 07:52 PM
#618
Registered Member
Join Date: Apr 2010
Location: va beach
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post a pic of your offroader/4x4.
'91 explorer xlt. havent done much to it besides cleaned it and put on rain vents.
anyone know why just my temp and gas guage dont work? gas guage is 1/4 with engine off and empty with engine on. no matter how much is in the tank
anyone know why just my temp and gas guage dont work? gas guage is 1/4 with engine off and empty with engine on. no matter how much is in the tank
04-19-2010, 04:33 PM
#619
Registered Member
Join Date: Jun 2003
Location: GA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
04-19-2010, 07:46 PM
#620
Registered User
Join Date: Aug 2005
Location: Hayes (Gloucester) VA
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post a pic of your offroader/4x4.
2. If the sender tests OK, check for power on the Red/Yellow (RD/YE) wire from fuse 11 at the cluster.
3. Check the Black/White (BK/WH) wire for ground.
4. If the signal in and the power and ground all test OK, replace the fuel gauge/anti-slosh module.
1. Disconnect the Red/White wire from the temperature sending unit, then turn the key on. The temperature gauge should peg below the cold mark. If it does, the sending unit is likely bad. Check resistance between the sender terminal and the base of the sender. With the engine cold, resistance should be 77 ohms or higher. Replace the sender if resistance is lower than 77 ohms with a cold engine.
2. If the gauge still reads above the cold mark with the sender disconnected, check the Red/White wire for a short to ground, and if no continuity to ground is found, replace the temperature gauge.
Also=since both are in your dash cluster-your cluster could have simply shit the bed on you....