idling very low too low
06-30-2008 | 09:25 AM
Thread Starter
Joined: Jun 2008
Posts: 12
Likes: 0
idling very low too low
i just got a b16 thrown in my ek and its idling low checked all wiring the distributor and the timing is on but its idling way to low please help
06-30-2008 | 12:55 PM
Joined: Nov 2002
Posts: 15,668
Likes: 0
From: How long is a piece of string?
Re: idling very low too low
Check the coolant temp sensor, MAP sensor, and TPS sensor.
06-30-2008 | 03:31 PM
Joined: May 2006
Posts: 185
Likes: 0
From: Miami!
Re: idling very low too low
Do a compression test. its fast and cheap
06-30-2008 | 06:26 PM
Joined: Jun 2008
Posts: 537
Likes: 0
From: c-field
Re: idling very low too low
+1
06-30-2008 | 06:36 PM
Joined: Dec 2002
Posts: 832
Likes: 0
Re: idling very low too low
Check to see if you have the IACV plugged in..... if disconnected it will idle below 500 rpms
06-30-2008 | 08:03 PM
Joined: Oct 2007
Posts: 418
Likes: 0
Re: idling very low too low
my car is doing the same thing, but ive got a d16y7. let me know if you find out what it is on yours.
06-30-2008 | 08:09 PM
Joined: Oct 2006
Posts: 66
Likes: 0
From: 757
Re: idling very low too low
try turning the idle adjustment screw on the t-body
06-30-2008 | 08:27 PM
Joined: Jun 2007
Posts: 592
Likes: 0
From: culpeper
Re: idling very low too low
do u have the throttle cable adjusted properly??
06-30-2008 | 10:00 PM
Joined: Sep 2005
Posts: 507
Likes: 0
Re: idling very low too low
My first thought is TPS, second thought is distributor, maybe it's a little retarded. everyone else had pretty good suggestions too.
07-02-2008 | 02:15 PM
Joined: Nov 2007
Posts: 100
Likes: 0
Re: idling very low too low
Something easy and cheap to do is make sure the plate on your throttle body is clean, if it has carbon buildup it will stop the airflow making the car idle low or even cut off at times. Just a thought.
07-02-2008 | 02:15 PM
Re: idling very low too low