1jzgte swap in sc400 wireing problem! WILL PAY SOMEONE TO FIX
#1
Registered Member
Thread Starter
Join Date: Aug 2011
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
1jzgte swap in sc400 wireing problem! WILL PAY SOMEONE TO FIX
ok so i originally had a sc300 with the 1jzgte 5spd conversion and i ran into a few wiring gremlins with the tail lights where they wouldnt work . so i decided to buy another car and start from the ground up besides the swap itself.
SO HERE IS MY PROBLEM:
ok so i put the swap in car have it at the point the fuel pump has 12v so it will cut on with ignition and such. and also wired a push to start to get power to the starter to work when ignition is turned on.
so i have power to my ignitor but i have no power to coils or even to injectors.
my car turns over like it wants to start but it is not getting any spark.
\REASON WHY I NO THE ECU ISNT BAD NOR IS THE IGNITOR:
pulled ecu out of my sc300 after running the car for 45min to burn up gas. and make sure nothing wasd wrong with the motor. so car was running then i pulled ecu and ignitor out before anythign else and put them in my house in a SAFE SPOT TO ENSURE THEY WERE NOT DAMAGED.
I WILL PAY SOMEONE TO COME OUT HERE AND FIX THE PROBLEM BECOUSE I AM AT THE POINT I AM TIRED OF CONSTANTLY TRYING DIFF PEOPLE IDEAS OUT ON HOW TO CONTERACT THE PROBLEM.
LIKE I SAID CAR RUN BEFORE SWAP WAS REMOVED AND THE SWAP WAS ONLY OUT THE CAR FOR A WEEK THEN WAS INSTALLED INTO NEW CAR. CAN SOMEONE PLEASE TELL ME WHAT MY ISSUE IS
what i have done :
i have tried rewiring the black w/ orange stripped wires in interior to a switched 12v source. ( did nothing )
bypassed the nutral position switch ( made no diff)
rewired fuel pump in sc400 to 12v mod. ( made fuel pump louder when ign is on )
im running out of ideas and i need to do or whatnot. im sure its somethign very simple preventing it from actually running but i have been dealing with this same problem for the past 2 months and its getting on my nerves and id rather have someone with expierence show me the problem and potentially fix it then take it to a shop and pay abnormal amounts of money to find out they cant do anything cuz they dont know anythign about the swap
SO HERE IS MY PROBLEM:
ok so i put the swap in car have it at the point the fuel pump has 12v so it will cut on with ignition and such. and also wired a push to start to get power to the starter to work when ignition is turned on.
so i have power to my ignitor but i have no power to coils or even to injectors.
my car turns over like it wants to start but it is not getting any spark.
\REASON WHY I NO THE ECU ISNT BAD NOR IS THE IGNITOR:
pulled ecu out of my sc300 after running the car for 45min to burn up gas. and make sure nothing wasd wrong with the motor. so car was running then i pulled ecu and ignitor out before anythign else and put them in my house in a SAFE SPOT TO ENSURE THEY WERE NOT DAMAGED.
I WILL PAY SOMEONE TO COME OUT HERE AND FIX THE PROBLEM BECOUSE I AM AT THE POINT I AM TIRED OF CONSTANTLY TRYING DIFF PEOPLE IDEAS OUT ON HOW TO CONTERACT THE PROBLEM.
LIKE I SAID CAR RUN BEFORE SWAP WAS REMOVED AND THE SWAP WAS ONLY OUT THE CAR FOR A WEEK THEN WAS INSTALLED INTO NEW CAR. CAN SOMEONE PLEASE TELL ME WHAT MY ISSUE IS
what i have done :
i have tried rewiring the black w/ orange stripped wires in interior to a switched 12v source. ( did nothing )
bypassed the nutral position switch ( made no diff)
rewired fuel pump in sc400 to 12v mod. ( made fuel pump louder when ign is on )
im running out of ideas and i need to do or whatnot. im sure its somethign very simple preventing it from actually running but i have been dealing with this same problem for the past 2 months and its getting on my nerves and id rather have someone with expierence show me the problem and potentially fix it then take it to a shop and pay abnormal amounts of money to find out they cant do anything cuz they dont know anythign about the swap
#2
Digital Life
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1jzgte swap in sc400 wireing problem! WILL PAY SOMEONE TO FIX
Might want to say where you're located
#3
RIP DRAGVA-2016
Join Date: Sep 2008
Location: super secret
Posts: 17,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1jzgte swap in sc400 wireing problem! WILL PAY SOMEONE TO FIX
PM tegboy757 he has a 2jz swapped gs300 and a 1jz swapped SC
#5
Re: 1jzgte swap in sc400 wireing problem! WILL PAY SOMEONE TO FIX
Igniter, injectors and the coils all recieve power from the same wire. It should be a thick black with yellow stripe.
#6
Friendly Jackboot
Join Date: Oct 2005
Location: NoVA
Posts: 4,282
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1jzgte swap in sc400 wireing problem! WILL PAY SOMEONE TO FIX
Holy shit, your spelling is atrocious! While someone else is fixing your wiring problems skim through a dictionary or something.
#8
Re: 1jzgte swap in sc400 wireing problem! WILL PAY SOMEONE TO FIX
i know for a 1j into a cressida half the people just hard wire power to the correct pins on their ecu for the injectors and igniter. just find your pinout and traces wires...
#9
Registered Member
Thread Starter
Join Date: Aug 2011
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1jzgte swap in sc400 wireing problem! WILL PAY SOMEONE TO FIX
located in richmond virginia THANK YOU ALL for the feedback it def. beats constantly looking on forums and finding the wrong answers
#10
Registered Member
Join Date: Aug 2010
Location: Roanoke
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1jzgte swap in sc400 wireing problem! WILL PAY SOMEONE TO FIX
Hit up clublex if you haven't already, it's pretty easy to find your answer there.