firing order and firing problem
#21
Registered Member
Thread Starter
Join Date: Jan 2007
Location: richmond / chesterfield
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Re: firing order and firing problem
Ok my motor was turning over and running then a buddy of mine cleaned my IAC valve after he did that it wouldn't fire. Then my dads friend said it might be the ignition module so i got it tested it passed so i put it back in the dizzy. So thats when i pulled the spark plugs out to see if they were getting spark which ALL of them have spark to them. Now my motor is still turning over BUT still NOT firing.
#22
Re: firing order and firing problem
find someone with a spare distributer and try it i had the same problem i used ether and it ran but when it heated up it died changed the modules still nothin swapped the dizzy started up fine somewhere i think a solder broke and as it heated up i think the gap expanded not saying its the same thing but it will eliminate the dizzy out of the problem
Thread
Thread Starter
Forum
Replies
Last Post