B16 Crx Clutch install
#1
i miss the lil guy
Thread Starter
Join Date: Dec 2003
Location: DC now, but VA Beach soon
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
B16 Crx Clutch install
hey has anyone here changed out a clutch from a B16A1 in a CRX. i only ask because i am wondering if there was enough room to get the tranny out with out having to tilt the whole enigne down. it would just be nice to have an idea how much crap im going to need to do. i tilted the engine with my brother's Ls turbo in a civic coupe when i was switching the clutches, but im not even sure i had to. If anyone could let me know before hand that would be a big help. getting that damn rear HASport mount in was a bitch when i first put it in. So if i can get away with not tilting the engine i will. but if not then i guess its better to know ahead of time. thanks
#2
AKA DEATH TRAP
Join Date: Aug 2003
Location: NEWPORT NEWS
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16 Crx Clutch install
All you have to do is pop the upper ball joints then take the radius rod out of the tranny side. swing the hub open.Then take the axles out on each side including the intermediate shaft.Drop the shifter . then take the bolt out of the tranny mount. next you have to take all the bolts out of the transmission.Then it should crack open then you're finished. Don't forget to torque the pressure plate down in the right pattern and to 19ft lbs. then you 're finished . Good luck I've done it a alot of times .
Thread
Thread Starter
Forum
Replies
Last Post