painting the Z
#1
Registered Member
Thread Starter
Join Date: Jun 2005
Location: Chesapeake WesternBranch
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
painting the Z
i just got finished priming the Z with that 2k primer(thick stuff) and was wondering if i should block it or use and orbital sander????? the car was primedwith rattle can paint then blocked roughly down and spots fixed and nowi primed it with the 2k stuff. i'm trying to get the most sshine with minimul work the car will prob only sell for 3k being that it is a 2+2
#2
DESTROYS DONUTS !!
Join Date: Nov 2002
Location: the seed has sprouted.
Posts: 13,275
Likes: 0
Received 0 Likes
on
0 Posts
Re: painting the Z
spray a black guide coat, or use a powder guide coat and block it lightly with 320-400 grit paper.when blocking a car you shouldnt be pressing too hard or your not ever going to find the spots that arent right. find your low spots, fix em. than block the repair spots again after primer. than lightly, and i mean lightly wetsand with 5-600 grit paper. if you wetsand too hard your going to negate the entire process of blocking the car. or you can use a d/a sander with a SOFT PAD and 600 grit paper and very light pressure for final prep.
Last edited by MORE IMPATIENT; 03-02-2008 at 04:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post