Civic Z6/Y8 NEW Forged SRP Pistons # 149199
#1
Civic Z6/Y8 NEW Forged SRP Pistons # 149199
SRP/JE D16Z6 75mm stock bore, 9.0:1 forged pistons and rings
(brand new, unused. will fit in Y8 or Z6. in a Y8 engine these will give you slightly more then 9.0:1 compression) Rings have not been filed. $320 Shipped
These are a great choice for a stock bore D series engine. the Piston to wall clearnace required for boost will give you enough room to hone your block if you want.
if you get vitaras, they require a much lower piston to wall clearance since they are a cast piston. your piston to wall clearance will most likely be too high with a Vitara in a stock 75mm bore. your engine is going to sound like a diesel truck there will be so much piston noise.
You really have to go to a 75.5mm vitara and then have your block bored & honed for correct Piston to wall clearance. which adds another $200+ to your costs.
NOTE: i only accept PAYPAL payments from Confirmed Addresses.
Or US Postal Money Orders.
(brand new, unused. will fit in Y8 or Z6. in a Y8 engine these will give you slightly more then 9.0:1 compression) Rings have not been filed. $320 Shipped
These are a great choice for a stock bore D series engine. the Piston to wall clearnace required for boost will give you enough room to hone your block if you want.
if you get vitaras, they require a much lower piston to wall clearance since they are a cast piston. your piston to wall clearance will most likely be too high with a Vitara in a stock 75mm bore. your engine is going to sound like a diesel truck there will be so much piston noise.
You really have to go to a 75.5mm vitara and then have your block bored & honed for correct Piston to wall clearance. which adds another $200+ to your costs.
NOTE: i only accept PAYPAL payments from Confirmed Addresses.
Or US Postal Money Orders.
Thread
Thread Starter
Forum
Replies
Last Post
2 LATE U LOSE
Engine / Exhaust / Drivetrain
29
03-12-2009 02:01 AM
gotboosthatch
Parts ARCHIVE
0
10-20-2008 12:44 PM
gotboosthatch
Parts ARCHIVE
6
10-18-2008 12:29 PM