Anyone with access to a Tech2 in the 757 ?
#1
Backyard Mechanic!
Thread Starter
Join Date: Apr 2007
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Anyone with access to a Tech2 in the 757 ?
Does anyone here have access to a Tech2 (GM OBD2 interface tool) ?
I just installed my 06 brakes this weekend, and bled the F out of the system. Upon startup we got an ABS fault, and the brake pedal goes to the floor.
My best guess is there was air in the ABS system, and when the vac line hit the brake booster is made it apparent.
Forums say the ABS motor needs to be cycled to get the air out, and it requires a Tech2.
Greenbrier Pontiac wants $100+ to flush the brake system, even though I just did that and only need a bleed....
This is in an 04 Pontiac GTO. Its inop in P-Town if anyon can gain access to the tool for a night, I will pay you for your time.
I just installed my 06 brakes this weekend, and bled the F out of the system. Upon startup we got an ABS fault, and the brake pedal goes to the floor.
My best guess is there was air in the ABS system, and when the vac line hit the brake booster is made it apparent.
Forums say the ABS motor needs to be cycled to get the air out, and it requires a Tech2.
Greenbrier Pontiac wants $100+ to flush the brake system, even though I just did that and only need a bleed....
This is in an 04 Pontiac GTO. Its inop in P-Town if anyon can gain access to the tool for a night, I will pay you for your time.
#3
Backyard Mechanic!
Thread Starter
Join Date: Apr 2007
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered member
Join Date: Jan 2003
Location: Working my life away
Posts: 3,041
Likes: 0
Received 0 Likes
on
0 Posts
#5
Backyard Mechanic!
Thread Starter
Join Date: Apr 2007
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with access to a Tech2 in the 757 ?
This is the same one the GM dealers use and not the $50 ebay special right? I just need to be sure I can cycle the abs motor, and from what I read it can only be done with a "real" tech2.
Are you available this week? I'd like to get this done asap so I can get my alignment.
Are you available this week? I'd like to get this done asap so I can get my alignment.
#6
Registered member
Join Date: Jan 2003
Location: Working my life away
Posts: 3,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with access to a Tech2 in the 757 ?
This is the same one the GM dealers use and not the $50 ebay special right? I just need to be sure I can cycle the abs motor, and from what I read it can only be done with a "real" tech2.
Are you available this week? I'd like to get this done asap so I can get my alignment.
Are you available this week? I'd like to get this done asap so I can get my alignment.
Yup.. this is the real one.. not the ebay bullshit..
<------ GM Mechanic..
Thread
Thread Starter
Forum
Replies
Last Post
TheGentleArt
Motorcycles & Parts
18
01-30-2008 12:19 PM