Anyone with Air Tools I can borrow to get crank pulley off?
#1
Registered Member
Thread Starter
Join Date: Apr 2004
Location: Richmond, VA
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Anyone with Air Tools I can borrow to get crank pulley off?
this may be a longshot but i cannot get my crank pulley off to save my life. the shortblock is out of the car and i can't hold the block still to get the crank pulley off. if anyone in richmond has airtools that i can borrow literally for 5 minutes to get this crank pulley bolt off i'll pay you $5 for letting me use it.
please respond to this if you have air tools. i'll simply bring the shortblock over in a truck and pop the bolt right off. let me know because i need to do this TONIGHT or TOMORROW MORNING.
i'll be up really late tonight so PLEASE post here if you really want to help me out. thanks a lot.
please respond to this if you have air tools. i'll simply bring the shortblock over in a truck and pop the bolt right off. let me know because i need to do this TONIGHT or TOMORROW MORNING.
i'll be up really late tonight so PLEASE post here if you really want to help me out. thanks a lot.
#3
superuser
Join Date: May 2003
Location: Glen Allen VA
Posts: 20,827
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with Air Tools I can borrow to get crank pulley off?
Tip just about any mechanic around lunchtime and he can pop it right off. I have a few air tools but am at work right now until 7pm. Let me know if you still need it off by then and you can swing by. Located off Woodman Rd in northern West End.
#5
Registered Member
Thread Starter
Join Date: Apr 2004
Location: Richmond, VA
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with Air Tools I can borrow to get crank pulley off?
thanks guys. i'm leaving town at 3 so i wouldn't be able to stop by Not Stock, but thanks for the offer.
i'm gonna take it to my friend at the Acura dealer and hopefully they can get it off. i tried my friends impact gun last night and it wouldn't budge. hopefully this works.
i'm gonna take it to my friend at the Acura dealer and hopefully they can get it off. i tried my friends impact gun last night and it wouldn't budge. hopefully this works.
#7
Fuckinitupagain
Join Date: Nov 2006
Location: Mechanicsville
Posts: 1,223
Likes: 0
Received 0 Likes
on
0 Posts
#8
Re: Anyone with Air Tools I can borrow to get crank pulley off?
stick a screw driver in the flywheel get a long as extention to have enough to get out from under the tire put a bar on it and yank, then when you put it back on get it as tight as you can then set breaker bar against the ground or chassis and crank the key just bump it a few times itll lock it right in
Thread
Thread Starter
Forum
Replies
Last Post
idriveahonda
Other
22
03-10-2009 06:08 PM