Let me know what u might think
#1
Registered User
Thread Starter
Join Date: Aug 2003
Location: norfolk va
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Let me know what u might think
Hey wasup i got a b16a jdm 2nd gen, when i start the car and let it idle the cel wont come on no matter how much i let it idle,but when i put the rpms around 2500 or so the cel comes on. When i turn the car off and turn it back on the cel goes off until i raise the rpms, i jumped the ecu but the cel just stays on and doesnt flash or anything. I thought it might be the o2 sensor so i replaced that, u think i might of got a faulty o2 sensor, shouldnt the check engine lite come on no matter what if the o2 is faulty? Also the idling keeps jumping from 800-1200 rpms, any help would be appreciated let me know. thanks
#9
Registered User
Thread Starter
Join Date: Aug 2003
Location: norfolk va
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
aiight i finally did get a code from the ecu, i kept resetting the ecu and doing it over to make sure i keep getting the same code so i know its working right, i keep getting 23 which is a knock sensor, can this cause the car to idle funny though? I disconnected the knock sensor and ran the engine but there was NO difference the cel still came on the same way everything was the same, does that mean anything?