i have a innovate wideband with a Digital Gauge...

i have an issue wiring it up..

blue wire
brown
yellow
black
red
and a wire with no covering

any help would be great.. i looked on the innovate website and there was no wiring diagram for the wire colors i have...

 

ookay... lets see if i can help... i just finished wiring mine up in my 90 EF.

looks like you have a 6-wire LC-1, so go to innovate's website and here's the user manual for your wideband o2 sensor.
http://www.innovatemotorsports.com/s...C-1_Manual.pdf


you didn't specify which car you have, but if it was an EF i could definitely give you some more help. search around on google for lc-1 and whatever car you have.




EDIT: i just saw your sig... if you have a 93, that's OBD1... so here's a website where some guy installed it on his OBD1 civic
http://www.lukekailburn.com/lc1.html

 

Tried both. Can't figure out the brown and yellow wires.

 

http://forum.pgmfi.org/ is a helpful site for this...i think that is the site i got all my info from.

 

Have you looked at page 4 of the manual posted above?

 

good deal......

 

good deal?

 

cmon man... yellow is the stock o2 wire... brown usually runs to your gauge

 

naw man... i got it though .. friend hooked it up..

not right.. though ... thanks... i didnt use the yellow or the brown..

 

dude... then you're car doesn't have an o2 sensor hooked up.


yellow is analog out 1 and brown is analog out 2... yellow is preprogrammed to output the stock o2 sensor voltage while brown is programmed to output between 0-5V (what gauges read)




tell your friend he's a tool... that, or both of you are