Turbo Exhaust
#1
Zerofucksgiven
Thread Starter
Join Date: Jun 2009
Location: Roanoke
Posts: 6,394
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Exhaust
Specs: 98 EK Hatch, d16z6, unknown size turbo runnin 7lbs...
I have 3" pipe runnin from the turbo all the way back to behind the passenger door and it just dumps out... It doesn't sound too great and its stupid loud... I've gone to a couple of exhaust shops and they told me I couldn't get 3" over the suspension for as low as my car is... So the two shops I've went to said I could run 2 1/2" from where the exhaust is cut off, over the suspension and back into a muffler... Would this screw up my flow and back pressure for my turbo?
I have 3" pipe runnin from the turbo all the way back to behind the passenger door and it just dumps out... It doesn't sound too great and its stupid loud... I've gone to a couple of exhaust shops and they told me I couldn't get 3" over the suspension for as low as my car is... So the two shops I've went to said I could run 2 1/2" from where the exhaust is cut off, over the suspension and back into a muffler... Would this screw up my flow and back pressure for my turbo?
#3
TurboPipingSystems
Join Date: Jul 2003
Location: USDM Land, Va Bch
Posts: 1,483
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Exhaust
I've done plenty of 3 inch pipe over the rear suspension... with even slammed cars. It is doable.... but for noise, try putting a couple of resonators on the long stretch. I should bring the noise down significantly. Also, pick the right muffler....
#5
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Exhaust
It's not the boost, it's the exhaust flow, and you aren't putting out that much on a single cam Z6 setup with 7psi most likely. 2.5" should be perfectly adequate.
#6
Slammedxpert
Join Date: Oct 2007
Location: Virginia Beach
Posts: 6,825
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Exhaust
I've got a 3inch custom mandrel bent exhaust with a 3in 3out thermal turbo muffler. Sounds great and exits the proper way. Not loud at all. Nice and soft.
PM me if your interested...$220 and its yours.
That's a video of it, it was open dumptube...thats where most of the noise was coming from. It was on my built turbo GSR with a 70 trim.
PM me if your interested...$220 and its yours.
That's a video of it, it was open dumptube...thats where most of the noise was coming from. It was on my built turbo GSR with a 70 trim.
#7
Zerofucksgiven
Thread Starter
Join Date: Jun 2009
Location: Roanoke
Posts: 6,394
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Exhaust
Yea, I've been told by several people 3" is overkill... For right now I'm probably just gonna downsize from the 3" to 2.5" and throw a muffler on it... Theres other more important things to fix at the moment... I need 2 tires... 195/55/15 if anyone has any...
#8
Slammedxpert
Join Date: Oct 2007
Location: Virginia Beach
Posts: 6,825
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Exhaust
Where are you located? I get good deals on tires.
#9
Re: Turbo Exhaust
If you plan to keep the car and run more boost (better tune) I'd go the whole way with 3", find a different shop that thinks they can do it.
I've been running a z6 on 2.5" for a few years now, already wish I would have gone with 3", but I'm running 13psi on a .60/.48 and want to go bigger.
If the car is a daily I'd go the 2.5 route w/ muffler, and a resonator on the long stretch of 3".
I've been running a z6 on 2.5" for a few years now, already wish I would have gone with 3", but I'm running 13psi on a .60/.48 and want to go bigger.
If the car is a daily I'd go the 2.5 route w/ muffler, and a resonator on the long stretch of 3".
Thread
Thread Starter
Forum
Replies
Last Post
xiLLtegRax
Parts ARCHIVE
20
04-22-2008 06:46 PM
ravenracer
Parts ARCHIVE
5
12-11-2007 10:50 PM