Z6 install into EG...no start issue
10-05-2009, 05:09 AM
#1
I <3 Hikki Chan!
Thread Starter
Join Date: Dec 2002
Location: 757
Posts: 4,313
Likes: 0
Received 0 Likes
on
0 Posts
Z6 install into EG...no start issue
Okay, I installed a '95 Z6 into my Dad's '92 Civic Hatch DX. The engine came with the Z6 harness, no distributor, IAC or TB. I used the B7s IAC and TB, as well as the distributor. The old engine's timing belt slipped and bent some valves but the distributor had a new coil, cap and rotor in it.
I've completed the install (the car is auto btw) and now I have no spark, all of the wires are connected and grounded. I'm just not getting any spark. There's 12v going to the coil/ignitor but nothing coming from the wires.
I've completed the install (the car is auto btw) and now I have no spark, all of the wires are connected and grounded. I'm just not getting any spark. There's 12v going to the coil/ignitor but nothing coming from the wires.
Thread
Thread Starter
Forum
Replies
Last Post