SR20DET SPUTTER
#22
Registered Member
Thread Starter
Join Date: Dec 2009
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Re: SR20DET SPUTTER
Alright I took my valve cover off it wasn’t the rocker arm, so I proceeded to crank my car over at the ignition....my timing chain slaps my top guide and that’s were the noise is coming from put a new timing chain tensioner in a week ago when I first thought it was chain issue. I believe I have the correct timing and I followed all procedures they had online for timing, but idk what exactly to do. Any suggestions....I’m think it is a tooth or so off but idk.
#25
Registered Member
Thread Starter
Join Date: Dec 2009
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Re: SR20DET SPUTTER
Well I’m a link off then I’m on the 11th link so I’ll try that if it doesn’t solve that problem then I’m just going to replace the chain and guides since that is the only thing that might fix it. See at 1st I thought my tensorner failed and it jumped timing since it just randomly happened. Thanks everyone for the help I greatly appreciate the community thanks a lot
#26
I <3 Hikki Chan!
Join Date: Dec 2002
Location: 757
Posts: 4,313
Likes: 0
Received 0 Likes
on
0 Posts
Re: SR20DET SPUTTER
Danny to the rescue! See, now that's who I consider to be a Mr. Expert...Mr. Expert. I've got a spare SR MAF if yours turns out to be bad. I switched to a HKS VPC F-CON on my SR.
Thread
Thread Starter
Forum
Replies
Last Post
((sr)) kelly
Engine / Exhaust / Drivetrain
2
07-17-2009 08:57 AM
methods
Engine / Exhaust / Drivetrain
0
06-09-2009 03:58 PM