difficult to put transmission in gear
#11
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: difficult to put transmission in gear
I had a friend who had the same problem. He had a vr4 with an aftermarket clutch. It wouldn't go in gear when on, but when it was off, it would go in. If you turned it on while a gear was engaged, it would jump forward. I told him to switch out his pressure plate. It worked after that. It turns out that the pressure plate had too much resistance for his hydraulic system to push the throwout bearing in.
#12
Re: difficult to put transmission in gear
Well thats the thing... It wasnt moving. Dude used one leg... nothing. Two legs... nothing. It just wasnt happening. He is a pretty strong guy, too.
#13
БЛЯДЬ!
Join Date: Sep 2005
Location: Up in here son
Posts: 5,940
Likes: 0
Received 0 Likes
on
0 Posts
Re: difficult to put transmission in gear
The clutch is not disengaging completely. How's the pedal travel? Does it feel right? Try adjusting the clutch pedal.
Does it move forward with the clutch disengaged but in gear?
Does it move forward with the clutch disengaged but in gear?
#14
Registered Member
Join Date: Mar 2008
Location: JDM CITY
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Re: difficult to put transmission in gear
I know exactly what it is...i had the same problem...Its your Pressure Plate...I had the same exact problem and i did everything possible...i did everything everyone has said to done on here...i thought maybe it was my fork and no it wasn't that either. It would go in while off and not when on...Its the pressure plate so change it and i guarantee you any amount of money it will be fixed...good luck
#15
13.5:1 Poor Mans R
Join Date: Jul 2005
Location: :)
Posts: 2,914
Likes: 0
Received 0 Likes
on
0 Posts
Re: difficult to put transmission in gear
Its the clutch it self. Mine did the same thing and I just did one on another civic. The retainers for the clutch springs will get grooves worn into them causing the spring to move and lock up.
#16
executive member
Thread Starter
Join Date: Feb 2003
Location: Fairfax
Posts: 974
Likes: 0
Received 0 Likes
on
0 Posts
Re: difficult to put transmission in gear
The clutch and pressure plate look ok, I didn't see anything out of the ordinary. No unusual wear, broken springs.....etc. The clutch and PP are fairly new and have about 10K on them. There was a fair amount play in the clutch fork which makes me wonder if the bearing somehow slipped off. As soon as I can locate a clutch alignment tool I am going to put it back and see if that takes care of it.
Anyone in the NOVA area have a clutch alignment tool for a volvo 850 or know of another car that uses a 27/32" diameter, 20 spline clutch tool? I've called around all the local parts stores and the Volvo dealer but no one will sell it seperately.
Anyone in the NOVA area have a clutch alignment tool for a volvo 850 or know of another car that uses a 27/32" diameter, 20 spline clutch tool? I've called around all the local parts stores and the Volvo dealer but no one will sell it seperately.
#17
CPL Us Army
Join Date: May 2006
Location: FREDERICKSBURG
Posts: 7,003
Likes: 0
Received 0 Likes
on
0 Posts
Re: difficult to put transmission in gear
sounds like the springs in the clutch disc decided they didnt like to stay in place. after reading the 1st page it sound 100% just like my problem (after hearing a few pops) while cruising through the neighborhood a few months ago.
Thread
Thread Starter
Forum
Replies
Last Post
morningstarinc
Want to Buy / Trade ARCHIVE
0
07-12-2008 03:56 PM