vtec distributor in non vtec b18b1....PLEAE READ
12-02-2010, 01:25 PM
#11
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: vtec distributor in non vtec b18b1....PLEAE READ
I don't have enough information to try yet.
So why did the starter need to be replaced? I'm guessing that if the starter went bad, it's possible that something in the wiring harness got melted and is no making intermittent contact. I can't remember if there is anything else on the circuit with the ECU fuse (besides the ECU), but something doesn't add up here.
So why did the starter need to be replaced? I'm guessing that if the starter went bad, it's possible that something in the wiring harness got melted and is no making intermittent contact. I can't remember if there is anything else on the circuit with the ECU fuse (besides the ECU), but something doesn't add up here.
Last edited by Fabrik8; 12-02-2010 at 01:48 PM.
12-02-2010, 02:34 PM
#12
Registered Member
Join Date: Jun 2007
Location: portsmouth v.a
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Re: vtec distributor in non vtec b18b1....PLEAE READ
check the ground on the thermostat housing this was causing the same fuse to blow in my civic once i tightened it everything was fine
12-02-2010, 07:29 PM
#13
Registered Member
Thread Starter
Join Date: Aug 2010
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: vtec distributor in non vtec b18b1....PLEAE READ
well the starter was just going bad. I replaced that just cause. There was no vin or serial on the old vtec distributor.
Thread
Thread Starter
Forum
Replies
Last Post