Best O2 bung plugs?
#11
ATGATT
Thread Starter
Join Date: Nov 2008
Location: Wangan
Posts: 10,477
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best O2 bung plugs?
#12
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best O2 bung plugs?
Here's the type I usually use, but I get them somewhere else and don't pay that much for the stainless ones. Yikes.
http://www.burnsstainless.com/O2Ringsandbungs-2.aspx
I've used hex head stainless plugs before also, they look pretty similar to a common bolt with a slightly shallow head.. Those are slightly dangerous though because they're easy to put a big wrench on and tighten the living shit out of.
http://www.burnsstainless.com/O2Ringsandbungs-2.aspx
I've used hex head stainless plugs before also, they look pretty similar to a common bolt with a slightly shallow head.. Those are slightly dangerous though because they're easy to put a big wrench on and tighten the living shit out of.
#13
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
#14
ATGATT
Thread Starter
Join Date: Nov 2008
Location: Wangan
Posts: 10,477
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best O2 bung plugs?
How positive are you that it won't overheat my trangs? I mean, the opening is right there facing the trans pan, and so close you could just barely get an O2 sensor between the pipe and the pan.
#15
Registered member
Join Date: Apr 2009
Location: Unionville, VA
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best O2 bung plugs?
It will be fine to drive to the store if its only a short ways away. you wont get enough heat in the pan like that once you are moving with how cold it is.
#16
ATGATT
Thread Starter
Join Date: Nov 2008
Location: Wangan
Posts: 10,477
Likes: 0
Received 0 Likes
on
0 Posts
#18
ATGATT
Thread Starter
Join Date: Nov 2008
Location: Wangan
Posts: 10,477
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best O2 bung plugs?
Thanks guys. If anybody asks me why I'm strapping a nickel to my exhaust, I'll just tell them I'm shaving weight.
Last edited by marlinspike; 12-20-2010 at 02:36 PM.
#19
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best O2 bung plugs?
I'm sure people have probably seen you do more confusing things with that car. LOL.
#20
ATGATT
Thread Starter
Join Date: Nov 2008
Location: Wangan
Posts: 10,477
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best O2 bung plugs?
You know...I found a box of these things that are used for tieing heat shielding to exhausts in my apartment. They're like hose clamps but they don't have a screw (instead you just pull the other end with pliers, basically they're metal zip ties). I wonder if that would work....
For about 5 years I drove with only 1 wiper because the driver's wipers on these cars basically gets 90% of the windshield and the passenger wiper had stripped its spline. I just told everybody that it was the 1-wiper racing conversion (a phrase my friend first attributed to it, wish I could claim full credit).
For about 5 years I drove with only 1 wiper because the driver's wipers on these cars basically gets 90% of the windshield and the passenger wiper had stripped its spline. I just told everybody that it was the 1-wiper racing conversion (a phrase my friend first attributed to it, wish I could claim full credit).
Last edited by marlinspike; 12-20-2010 at 03:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post