Honda Ruckus / Scooter Thread
So, I'm not sure yet but either the frame or the aluminium "chinbone" is crooked. I', thinking it may be the frame. I need to get it it inside so I can better inspect it.
Parts i recently ordered...
1. 140.0mm Hub - $65
2. 10x5 Rear wheel - $35
3. 210mm Rear Coil -$60
4. Slick Speed variator $55
5. Michelin bopper tires front & rear - $73
waiting on the Exhaust, intake, Cdi, and Clutch springs for the spring, weather needs to get warmer so i can do some tuning...
1. 140.0mm Hub - $65
2. 10x5 Rear wheel - $35
3. 210mm Rear Coil -$60
4. Slick Speed variator $55
5. Michelin bopper tires front & rear - $73
waiting on the Exhaust, intake, Cdi, and Clutch springs for the spring, weather needs to get warmer so i can do some tuning...
Last edited by Buddha.; Feb 11, 2011 at 06:37 PM.
Just dismantled my Ruckus...
The front and rear frame are fine. It looked crooked at first glance because the engine mount was totaled. Luckily I just bought a new, longer one
Handlebar, mirrors, and brake levers are done.
The plastic around the radiator is cracked up, is it ruined? The fins don't look bent at all.
These things are tough as hell.
The front and rear frame are fine. It looked crooked at first glance because the engine mount was totaled. Luckily I just bought a new, longer one

Handlebar, mirrors, and brake levers are done.
The plastic around the radiator is cracked up, is it ruined? The fins don't look bent at all.
These things are tough as hell.
http://totalruckus.com/phpBB3/viewtopic.php?f=9&t=54297
Edit: didnt see your post above^ , your radiator should be fine, i took my cover off. Also does it start up at all?




