Prelude Techs
03-25-2004, 06:35 AM
#1
.........
Thread Starter
Join Date: Feb 2003
Posts: 4,840
Likes: 0
Received 0 Likes
on
0 Posts
Prelude Techs
1992 Honda Prelude Si H23 stock
Stock motor is being replaced with a H22a4 with a '96 trany.
What ECU would work best for this set-up? (p13, p28,...)
The motor has a Euro-R intake mani from a Accord. Supposedly the Accord mani was a H-series, will it fit?
Axles will need to be replaced, what year stock ones to use?
Any other issues that might come up, from personal experience or common problems, would be appreciated.
Stock motor is being replaced with a H22a4 with a '96 trany.
What ECU would work best for this set-up? (p13, p28,...)
The motor has a Euro-R intake mani from a Accord. Supposedly the Accord mani was a H-series, will it fit?
Axles will need to be replaced, what year stock ones to use?
Any other issues that might come up, from personal experience or common problems, would be appreciated.
03-25-2004, 07:24 AM
#2
the"V8nightmare"
Join Date: Jan 2004
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Re: Prelude Techs
h22 should bolt right in if the car came with an h series already? should be able to use the same axles even. just need vtec wired in im sure u can modify the stock ecu to do that chec www.hondata.com and see what it would cost to modift the ecu. then go from there.
03-25-2004, 07:31 AM
#3
.........
Thread Starter
Join Date: Feb 2003
Posts: 4,840
Likes: 0
Received 0 Likes
on
0 Posts
Re: Prelude Techs
I don't want the ECU modified since it won't work as well. This car isn't going to be anything highly modified. More of a stock performance car. The less bells and whistles the better. The stock look and feel is what I'm looking for.
Thread
Thread Starter
Forum
Replies
Last Post