Wiring B18C1 Into 92 VX Hatch
#1
FredVegas
Thread Starter
Join Date: Jan 2003
Location: Fredericksburg, VA
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
Wiring B18C1 Into 92 VX Hatch
Ok, put a motor into a friends hatch, he has a 92 VX, but im kinda confused with the wiring, I know its simple, but we used the GSR harness that came with it, now my question is, I know when you do the swap you have to convert the 5 wire o2 plug to 4 wire and wire up the IAB and Knock sensor. So my question is:
1. Since I used the GSR harness do I have to convert the o2 plug?
2. Now what do I have to do to wire the IAB and knock sensor?
Some help would be appricated.
Thanks
1. Since I used the GSR harness do I have to convert the o2 plug?
2. Now what do I have to do to wire the IAB and knock sensor?
Some help would be appricated.
Thanks
#2
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wiring B18C1 Into 92 VX Hatch
The IAB and knock sensor go to the ECU.. There are a lot of swap instructions for this swap, go to Hasport's site and poke around, you should find just about everything you need for wiring help..
Thread
Thread Starter
Forum
Replies
Last Post