This is SRS business
#1
Dickbutt #peentip
Thread Starter
Join Date: Jan 2007
Location: Virginia Beach
Posts: 10,256
Likes: 0
Received 0 Likes
on
0 Posts
This is SRS business
Okay, so at the shop I'm working at- we have an Autel scanner. I've been taking care of the small issues plaguing my 00' Z3M- and I'm now at the airbag light.
I went to reset what I had off the bat and got an error:
The errors:
ECU info:
I see code 11 is for the battery pyro. I had a glance at it and backprobed the plug. 1.4v at the connector. It's obviously never been fired- from what I can tell.
My question is- the F0 code, am I looking at replacing the module?
- - - Updated - - -
Okay, the airbag computer in my car is part number 65778386192, which I have found was superseded by part number 65776908896. Anyone know why this is? Are these prone to failure?
I went to reset what I had off the bat and got an error:
The errors:
ECU info:
I see code 11 is for the battery pyro. I had a glance at it and backprobed the plug. 1.4v at the connector. It's obviously never been fired- from what I can tell.
My question is- the F0 code, am I looking at replacing the module?
- - - Updated - - -
Okay, the airbag computer in my car is part number 65778386192, which I have found was superseded by part number 65776908896. Anyone know why this is? Are these prone to failure?
Last edited by Kris.Is.Foamin; 05-17-2013 at 11:37 AM.
#2
Fitty Tuckin
Join Date: May 2006
Location: VA's West Side - 540
Posts: 12,375
Likes: 0
Received 0 Likes
on
0 Posts
Re: This is SRS business
It's because you are tail humping the exhaust...........all bimmer owners stick their weiner in the exhaust to make the car happy.
#3
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: This is SRS business
It's no use wondering why a part was superseded. There a lot of reasons why it happens, like a change of supplier, change of material, change of manufacturing process, add an extra hole for wider model compatibility, all sorts of other design changes, etc... If it's an '03 and you're looking for a currently produced electronics module, it's probably been superseded with a new software version or some change to the electronics design, or one of the major electronics components is now obsolete which requires some circuit board changes or circuit redesign. Sometimes it's to fix something or improve reliability, yes, but there are so many equally plausible other reasons that it's not worth pondering.
#4
Dickbutt #peentip
Thread Starter
Join Date: Jan 2007
Location: Virginia Beach
Posts: 10,256
Likes: 0
Received 0 Likes
on
0 Posts
Re: This is SRS business
It's no use wondering why a part was superseded. There a lot of reasons why it happens, like a change of supplier, change of material, change of manufacturing process, add an extra hole for wider model compatibility, all sorts of other design changes, etc... If it's an '03 and you're looking for a currently produced electronics module, it's probably been superseded with a new software version or some change to the electronics design, or one of the major electronics components is now obsolete which requires some circuit board changes or circuit redesign. Sometimes it's to fix something or improve reliability, yes, but there are so many equally plausible other reasons that it's not worth pondering.
#6
Super Secret Agent
Join Date: Apr 2004
Location: 562 Long Beach KNUCKLE
Posts: 13,681
Likes: 0
Received 0 Likes
on
0 Posts
Re: This is SRS business
00 e36/8 = MRS III
I'd say it most likely needs a module. The MRS module is mounted in front of the shifter underneath the center console. Super easy to replace. Tightening torque on the bolts holding the module down is 7 ft/lbs.
I believe these modules can only be deployed 3 times prior to replacement so purchasing a used unit is a gamble.. The module will have to be coded using a GT1/Autologic or something of that nature.
I'd say it most likely needs a module. The MRS module is mounted in front of the shifter underneath the center console. Super easy to replace. Tightening torque on the bolts holding the module down is 7 ft/lbs.
I believe these modules can only be deployed 3 times prior to replacement so purchasing a used unit is a gamble.. The module will have to be coded using a GT1/Autologic or something of that nature.
Last edited by Archer; 05-17-2013 at 04:52 AM.
#7
Dickbutt #peentip
Thread Starter
Join Date: Jan 2007
Location: Virginia Beach
Posts: 10,256
Likes: 0
Received 0 Likes
on
0 Posts
Re: This is SRS business
Fixed the pics- they should show now.
Archer- do you have access to a scan tool capable of this? Also, can a known good module be installed into another car- and reprogrammed to work? New modules ship uncoded, but cost around 670
Archer- do you have access to a scan tool capable of this? Also, can a known good module be installed into another car- and reprogrammed to work? New modules ship uncoded, but cost around 670
#8
Super Secret Agent
Join Date: Apr 2004
Location: 562 Long Beach KNUCKLE
Posts: 13,681
Likes: 0
Received 0 Likes
on
0 Posts
Re: This is SRS business
YARR THIS BE TOPIX
I use an Autologic scan tool on a daily basis. I've never installed a used module but AFAIK they are not VIN specific and can be coded to a new vehicle IF they are un-deployed.
I use an Autologic scan tool on a daily basis. I've never installed a used module but AFAIK they are not VIN specific and can be coded to a new vehicle IF they are un-deployed.
Thread
Thread Starter
Forum
Replies
Last Post