1987 Mazda b2200
#1
Registered member
Thread Starter
Join Date: Feb 2012
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
1987 Mazda b2200
Name: Keith
Location: Staunton
Means of contact: 540 688 9196
Price: 600 obo or trade
Description: not really for me but I'm not pressed to get rid of it. Just got a new head gasket. Supposedly got new valve seals by previous owner but it's still leaking from them which is causing some smoking and oil burning.Other than valve seals motor is in great shape. Supposedly only 85k on motor. Has new alt,water pump. Radiator, hoses, timing belt, clutch kit. And a lot more I'm probly forgetting. Do not be put off by it needing valve seals, we did the head gasket in 2.5 hours start to finish. If you don't want it slammed on the ground like it is I have the stock suspension stuff. Ride is currently very rough, I will be raising it up when I have time
Again this is just to see what's out there. I would love an mx6 will even take a blown up one if everything is in good shape ( I have access to a spare motor) will also trade for a clean civic with bad motor. Or other things just offer up. I would rather not add cash
Pictures:
Will try to get more pictures soon
Location: Staunton
Means of contact: 540 688 9196
Price: 600 obo or trade
Description: not really for me but I'm not pressed to get rid of it. Just got a new head gasket. Supposedly got new valve seals by previous owner but it's still leaking from them which is causing some smoking and oil burning.Other than valve seals motor is in great shape. Supposedly only 85k on motor. Has new alt,water pump. Radiator, hoses, timing belt, clutch kit. And a lot more I'm probly forgetting. Do not be put off by it needing valve seals, we did the head gasket in 2.5 hours start to finish. If you don't want it slammed on the ground like it is I have the stock suspension stuff. Ride is currently very rough, I will be raising it up when I have time
Again this is just to see what's out there. I would love an mx6 will even take a blown up one if everything is in good shape ( I have access to a spare motor) will also trade for a clean civic with bad motor. Or other things just offer up. I would rather not add cash
Pictures:
Will try to get more pictures soon
Last edited by tweety2300; 01-06-2014 at 08:11 AM.
#2
Registered member
Thread Starter
Join Date: Feb 2012
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Mazda b2200
Bump, now up for sale. Hood latch cable broke or popped off and can't point can't add or check oil and is not being driven. Needs to go asking 1200 but very negotiable
No reasonable offer will be turned down
No reasonable offer will be turned down
#3
Registered Member
Join Date: Jan 2012
Location: waynesboro
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Mazda b2200
500$
#4
Registered member
Thread Starter
Join Date: Feb 2012
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Mazda b2200
Bump, need it gone this week
#5
Registered member
Thread Starter
Join Date: Feb 2012
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Mazda b2200
Price drop to 800 found something I want but need a bit more money
Can also get a ka24 swap we was planing on putting in it for 600 comes with motor trans harness and I think I have the ecu
Can also get a ka24 swap we was planing on putting in it for 600 comes with motor trans harness and I think I have the ecu
#6
Autobots detected
Join Date: Mar 2007
Location: Cybertron
Posts: 2,742
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Mazda b2200
did you post this on mazda247? im sure some people from VA will bite.
#7
Registered member
Thread Starter
Join Date: Feb 2012
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Mazda b2200
Bump still have it, still need it gone
#8
Registered member
Thread Starter
Join Date: Feb 2012
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Mazda b2200
Bump, really looking for a civic or 240 shell
#9
Registered member
Thread Starter
Join Date: Feb 2012
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Mazda b2200
Bump