Using butane torch on timing case
#11
corona connessuer
Join Date: Nov 2002
Location: GUAM
Posts: 3,425
Likes: 0
Received 0 Likes
on
0 Posts
do not burn the timing cover!
use plenty of pb blaster and a strong impact gun with a compressor that has a rating of 150psi. works for me every time!
i have used heat on the bolt a few times but never alot. you have to watch using heat or you will damge the front oil seal and have a nice oil leak!!!
use plenty of pb blaster and a strong impact gun with a compressor that has a rating of 150psi. works for me every time!
i have used heat on the bolt a few times but never alot. you have to watch using heat or you will damge the front oil seal and have a nice oil leak!!!
#12
Bitches get Stitches
Join Date: Mar 2003
Location: Chesapeake
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
the belt cover is held on by 5 10mm bolts. take off the valve cover, take the upper cover off (i think 4 10mm) and then take the lower off. burning it off is the stupidest thing i've ever heard of.
#15
Registered User
Join Date: Aug 2003
Location: norfolk va
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by sk8rmike
the belt cover is held on by 5 10mm bolts. take off the valve cover, take the upper cover off (i think 4 10mm) and then take the lower off. burning it off is the stupidest thing i've ever heard of.
the belt cover is held on by 5 10mm bolts. take off the valve cover, take the upper cover off (i think 4 10mm) and then take the lower off. burning it off is the stupidest thing i've ever heard of.
Man u been trying to get ur timing belt off for like 3months now, why dont u just take it to the shop cause it seems that its not working for u
#16
fabricated reality
Join Date: May 2003
Location: Va Beach
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
uhh.. heat does make shit expand. thats why when you heat someting with a stuck bolt the part you are heating {lets say a block} will expand before the bolt does. the bolt is much more dense material and harder to get hot, not to mention its insulated by all the metal its stuck it. so uhh u heat up the metal, it gets bigger bolt stays the same size voila bolt comes right out..
however... try and take a bolt out of a hot motor where everything has had a chance to heat soak and expand ull never get that bolt out.
however... try and take a bolt out of a hot motor where everything has had a chance to heat soak and expand ull never get that bolt out.
#17
DA LEPRAHKAHNZ GOLLD
Join Date: Sep 2003
Location: Newport News
Posts: 5,423
Likes: 0
Received 0 Likes
on
0 Posts
well... not to say either person is wrong but if you take a can of water or soda or what have you and freeze it... it will explode or stretch way out... so i know freezing stuff makes it expand =/
Thread
Thread Starter
Forum
Replies
Last Post