When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I ran into the same problem with my civic (B18 swap). after 2 days of rewiring the entire ECU, i decided to read out some wires, Come to find out, the ICM (ignition control module) went bad. It's a $200 part, but needed to be replaced...
I ran into the same problem with my civic (B18 swap). after 2 days of rewiring the entire ECU, i decided to read out some wires, Come to find out, the ICM (ignition control module) went bad. It's a $200 part, but needed to be replaced...
Was the car just a shell before you started? Are your fuel injectors working?
no i blew a motor in it about 2 years ago then just decided to start oner again with a rebuilt one ill have to check the injectors ...what if there not?
have you checked if the cam/distributor rotor was turning? Timing Belt? If the cam/belt isn't moving, the ECU won't see any signals to enable the ignitor. HTH