Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

B16 oil leak

Thread Tools
 
Old Mar 23, 2007 | 08:31 AM
  #11  
Dang Yo's Avatar
Dang Yo
Justa lil 6
 
Joined: Jul 2003
Posts: 2,326
Likes: 0
From: VA 757
Dang Yo is a jewel in the roughDang Yo is a jewel in the roughDang Yo is a jewel in the roughDang Yo is a jewel in the roughDang Yo is a jewel in the rough
Default Re: B16 oil leak

Originally Posted by b16 snatch
You didn't say anything about replacing your front crank seal. Mine had a leak (from installing a new one incorrectly ) and from what I could figure the spinning of the crank slung the oil onto the firewall/crossmember area. I installed a new (correctly this time ) and no more leak.

The only way I figured it out was by getting under the car and looking directly up at where the front crank seal is. Then I followed that line straight back towards the firewall and if that's the area where the oil was.
+1.. clean the entire motor off and drive it around and see where its coming from. most likely the oil pump or front main seal, when the motor is running the oil goes everywhere off the crank pulley
Old Mar 24, 2007 | 05:03 AM
  #12  
SlowLS's Avatar
SlowLS
Thread Starter
Sumospeed #O.G.
 
Joined: Apr 2003
Posts: 2,514
Likes: 0
From: Va Beach
SlowLS is an unknown quantity at this point
Default Re: B16 oil leak

I've already cleaned the whole motor. It is not the crank or rear main seals. Both ends of the motor and completely oil free. Bought a new oil cooler gasket and will be replacing that today and seeing if it is that. The it will be the cam cap and vetc pressure switch gasket and dizzy o-ring cause there is an oil leak from up there also.
Old Mar 24, 2007 | 10:48 AM
  #13  
Fabrik8's Avatar
Fabrik8
Racetracks
 
Joined: Nov 2002
Posts: 15,668
Likes: 0
From: How long is a piece of string?
Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8
Default Re: B16 oil leak

So you've cleaned the whole engine and it's leaking so badly that oil is getting everywhere too fast to find out where it's coming from?
Old Mar 24, 2007 | 05:03 PM
  #14  
SlowLS's Avatar
SlowLS
Thread Starter
Sumospeed #O.G.
 
Joined: Apr 2003
Posts: 2,514
Likes: 0
From: Va Beach
SlowLS is an unknown quantity at this point
Default Re: B16 oil leak

Originally Posted by Fabrik8
So you've cleaned the whole engine and it's leaking so badly that oil is getting everywhere too fast to find out where it's coming from?
NO. I've cleaned the whole engine and could not see the oil leak. not oil really leaking. Then I got my car tuned and it was smoking pretty bad, not through the exhaust, but from under the car. Like something it leaking onto the exhaust. And when i drive it hard and oil pressure is up, I can smell something burning off the exhaust. There is not a huge leak and fluid levels in the motor and tranny are always good. But there is an oil residue on the rear crossmember and shiftlinkage and stuff. Not oil soaked, but there is oil or something oil it.
Old Apr 5, 2007 | 09:02 PM
  #15  
hanlonr9's Avatar
hanlonr9
Registered Member
 
Joined: Jan 2007
Posts: 421
Likes: 0
hanlonr9 has disabled reputation
Default Re: B16 oil leak

its ur oil cooler o-ring gasket guranteed
Old Dec 16, 2007 | 02:14 PM
  #16  
caeavesRSX-S's Avatar
caeavesRSX-S
before you were here
 
Joined: Feb 2003
Posts: 446
Likes: 0
From: track days
caeavesRSX-S has disabled reputation
Default Re: B16 oil leak

[QUOTE=SlowLS;2928264]I've already cleaned the whole motor. It is not the crank or rear main seals. Both ends of the motor and completely oil free. Bought a new oil cooler gasket and will be replacing that today and seeing if it is that. The it will be the cam cap and vetc pressure switch gasket and dizzy o-ring cause there is an oil leak from up there also.[/QUOTE]

I have those leaks too. Can a head gasket also be the cause because I have oil coming from the corner of that too. Or is just the leak down from the stuff above it?
Old Dec 16, 2007 | 02:17 PM
  #17  
caeavesRSX-S's Avatar
caeavesRSX-S
before you were here
 
Joined: Feb 2003
Posts: 446
Likes: 0
From: track days
caeavesRSX-S has disabled reputation
Default Re: B16 oil leak

Does anyone have part numbers for the afformentioned gaskets. I tried Majestics site but haven't figured it out yet.
Old Dec 16, 2007 | 04:30 PM
  #18  
caeavesRSX-S's Avatar
caeavesRSX-S
before you were here
 
Joined: Feb 2003
Posts: 446
Likes: 0
From: track days
caeavesRSX-S has disabled reputation
Default Re: B16 oil leak

30110-PA1-732 Distributor O-RING (26.4X3.1) (TEC) - 1 $1.73 $1.27
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
slowgsx95
Tech Talk
5
Mar 23, 2009 07:12 PM
dodo94integra
Tech Talk
14
Aug 31, 2006 08:50 PM
sebassttiann
Tech Talk
6
Dec 12, 2005 10:53 AM
94_CRVtec
Tech Talk
6
Aug 24, 2005 02:32 PM




All times are GMT -8. The time now is 10:54 AM.