17's on a honda
12-20-2007, 04:55 AM
#11
TurboPipingSystems
Join Date: Jul 2003
Location: USDM Land, Va Bch
Posts: 1,483
Likes: 0
Received 0 Likes
on
0 Posts
Re: 17's on a honda
I'm gonna tell you now... if you run 17's with a +38 or lower offset, then lower it more than 1.8 inches.... your tires will rub against the outer edge of your fender well... I'm speaking from experience.... i ruined my 2-3 month old front tires then....
12-20-2007, 08:23 AM
#12
Banned
Join Date: Apr 2006
Location: Lynchburg, Va
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
Re: 17's on a honda
ALOT of them will not rub untilyou are turning with some speed and or hit slight bumps in road. my slipstreams 15inch rub with a 205/50/15 when I hit bumps/turn hard
12-20-2007, 09:52 AM
#14
My dick is tan.
Join Date: Jan 2004
Location: NoVA/VA Beach
Posts: 2,615
Likes: 0
Received 0 Likes
on
0 Posts
12-20-2007, 11:56 AM
#16
Double Agent HT
Join Date: Nov 2004
Location: Installing Your Theater
Posts: 5,518
Likes: 0
Received 0 Likes
on
0 Posts
Re: 17's on a honda
I had a 93 civic 4d with 17x7s and the tires were 205/40's . here is a pic:
as long as the car was not to low it never rubbed. i also put the wilwood brake kit on my civic that had 4 pot calipers and a 12.19 inch rotor and the 17 inch rim helped clearance issues. i hoped this helped.
as long as the car was not to low it never rubbed. i also put the wilwood brake kit on my civic that had 4 pot calipers and a 12.19 inch rotor and the 17 inch rim helped clearance issues. i hoped this helped.
12-20-2007, 12:13 PM
#17
Registered Member
Thread Starter
Join Date: Oct 2007
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
Re: 17's on a honda
in 205/40/17 is the 40 the offset?or is offset something to do w/ the rim not tire? yea my cars not lowered at all its stock and i figured i wouldn't lower it. so hmmwhats the worst that will happen if it rubs? if it does rub what simple mods can i do to stop it.
12-20-2007, 12:32 PM
#18
My dick is tan.
Join Date: Jan 2004
Location: NoVA/VA Beach
Posts: 2,615
Likes: 0
Received 0 Likes
on
0 Posts
Re: 17's on a honda
The 40 is the tires profile in relation to its width. It has nothing to do with the offset. Google "wheel offset" and you will find your answer. If you just trying to get wheels for the hell of putting on wheels, don't worry about it. You should only worry about offset if you're concerned about having your wheel flush or not.
12-20-2007, 12:47 PM
#19
Registered member
Join Date: Apr 2003
Location: Ellicott City MD 21043
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
Re: 17's on a honda
No, the 40 refers to the tire's section height (sidewall aspect ratio). In this case, the tire has a tire section height of 4.03 inches. Most of the 17" wheels that come in a 4x100 bolt pattern are made in a 40 offset. The offset is usually stamped on the inside of the rim on one of the spokes or on the mounting face.
What are the rims that you are wanting to put on the car?
What are the rims that you are wanting to put on the car?
12-20-2007, 01:09 PM
#20
Registered Member
Join Date: Mar 2006
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Re: 17's on a honda
they are team loco's, the car was lowered 2.5 inches on coil over sleeves. that was the max it could go down. i lowered it so many time before i found the lowest i could have it. let me put it this way, at 2.75 inches it would rub. 2.5 was the lowest i could put it and have it not rub at all. even when i hit a bad bump it wouldn't rub. i have had it lowered from 1 - 4 inches so if you have any questions let me know. i kept mine at 2.5 because it was the best to keep my tires aligned with out a camber kit.