Honda Ruckus / Scooter Thread
SPARKLEmotion
Joined: Feb 2007
Posts: 3,084
Likes: 0
From: Harlem Springs
Re: Honda Ruckus / Scooter Thread
I peeled the tape back to look for splices but didn't see anything. Just connectors stuck into the black harness socket. Looks straight forward.
Forgive the dirtiness, havn't prepped the front end for anything yet.
Forgive the dirtiness, havn't prepped the front end for anything yet.
SPARKLEmotion
Joined: Feb 2007
Posts: 3,084
Likes: 0
From: Harlem Springs
Re: Honda Ruckus / Scooter Thread
Just looked at it further. Ive never switch the high beams on so didn't notice this:
Who ever put it on wired booth sides into the RIGHT stock socket instead of wiring ones side high and the other low. It's marked on the back of the light which side is which. I would say the wires on the light would need to be extended if anything to install it PROPERLY. Other than that it looks complete and not battered. It is dirty though LOL
PM me if your serious, I can have it off and shipped out tomorrow.
Who ever put it on wired booth sides into the RIGHT stock socket instead of wiring ones side high and the other low. It's marked on the back of the light which side is which. I would say the wires on the light would need to be extended if anything to install it PROPERLY. Other than that it looks complete and not battered. It is dirty though LOL
PM me if your serious, I can have it off and shipped out tomorrow.
Last edited by FObangah; Jul 17, 2011 at 07:58 PM.
TwoWheels YearRound
Joined: Mar 2010
Posts: 12,705
Likes: 0
From: Inside the Beltway
Re: Honda Ruckus / Scooter Thread
Where do you live again? I forgot what Harlem Springs really means. I'm tempted to just drive out there just for the fuck of it. My Miata has been sitting too long anyways.
SparkleMotion
Joined: Oct 2008
Posts: 1,363
Likes: 0
TwoWheels YearRound
Joined: Mar 2010
Posts: 12,705
Likes: 0
From: Inside the Beltway
Re: Honda Ruckus / Scooter Thread
Just looked at it further. Ive never switch the high beams on so didn't notice this:
Who ever put it on wired booth sides into the RIGHT stock socket instead of wiring ones side high and the other low. It's marked on the back of the light which side is which. I would say the wires on the light would need to be extended if anything to install it PROPERLY. Other than that it looks complete and not battered. It is dirty though LOL
PM me if your serious, I can have it off and shipped out tomorrow.
Who ever put it on wired booth sides into the RIGHT stock socket instead of wiring ones side high and the other low. It's marked on the back of the light which side is which. I would say the wires on the light would need to be extended if anything to install it PROPERLY. Other than that it looks complete and not battered. It is dirty though LOL
PM me if your serious, I can have it off and shipped out tomorrow.
Does this look right compared to what you have?
http://totalruckus.com/phpBB3/viewto...26857&p=382346
OK, looking at the back of the headlight..... Black goes to Green, Left White goes to Blue, and Right White goes to White. The first color is the Headlight wiring and the second color is off the stock ruckus harness. Hope this helps!!!
Cut off the Right headlight plug (looking at them from behind) and just make sure to leave enough wire on the plug so that if you ever want to return to stock you can solder it back on the harness.
Cut off the Right headlight plug (looking at them from behind) and just make sure to leave enough wire on the plug so that if you ever want to return to stock you can solder it back on the harness.