A.P.E. - 3rd Gen Performance
Thread Starter
A.P.E.
Joined: Nov 2002
Posts: 610
Likes: 0
From: NN
Originally posted by azrakain
I thought you were running a little higher than that.
I thought you were running a little higher than that.
1991 RS
383 cid LT1
HEAD VOLUME: 54cc
BORE: 4.030"
STROKE: 3.75"
HEAD GASKET COMPRESSED THICKNESS: 0.039"
GASKET BORE DIAMETER: 4.166"
DECK HEIGHTH: 0.012"
PISTON DISH DOME VOLUME: 16cc (16cc x 0.061"= 0.976")
HEAD VOLUME: 54cc x 0.061= 3.294"
--------------------------------------------------------------------------------
SWEPT VOLUME= 3.1416 x GASKET BORE x GASKET BORE x STROKE *
DIVIDED BY 4
TDC VOL.=HEAD VOL.+GASKET VOLUME+DECK VOL.+DISHDOME VOL.
HEAD VOL.= IS MEASURED AND OR PUBLISHED IN CUBIC CENTIMETERS
GASKET VOL=3.1416xGASK BORExGASK BORExCMP GASK THICKNESS
DIVIDED BY 4
DECK VOL= 3.1416 x BORE DIA x BORE DIA x DECK HEIGHTH *
DIVIDED BY 4
COMP. RATIO= SWEPT VOL+ TDC VOL DIVIDED BY TDC VOL
--------------------------------------------------------------------------------
DISH DOME VOLUME: 0.976" *
SWEPT VOLUME: 51.1" *
TDC VOLUME: 4.954" *
HEAD VOLUME: 3.294" *
GASKET VOLUME: 0.531" *
DECK VOLUME: 0.1530" *
COMPRESSION RATIO: 11.3-1
Thread Starter
A.P.E.
Joined: Nov 2002
Posts: 610
Likes: 0
From: NN
Originally posted by Vortech8pSI
385, saw your camaro at abacus, bad ass! meanest chevy ive heard/seen around. thumbs up.
385, saw your camaro at abacus, bad ass! meanest chevy ive heard/seen around. thumbs up.
appriciate it..
Registered User
Joined: Feb 2003
Posts: 3
Likes: 0
From: Newport News
Hopefully the RS will be done very soon.....
Still have a few things to get to make her roadworthy, I appriciate everyones complements. We have put a lot of hardwork into this project. Hopefully power levels will soar to our expectations.
Still have a few things to get to make her roadworthy, I appriciate everyones complements. We have put a lot of hardwork into this project. Hopefully power levels will soar to our expectations.
