Any audio heads on the site
#41
Digital Life
Join Date: Feb 2006
Location: Worldwide
Posts: 4,850
Likes: 0
Received 0 Likes
on
0 Posts
![83Stang5.0](images/reputation/reputation_pos.gif)
![83Stang5.0](images/reputation/reputation_pos.gif)
![83Stang5.0](images/reputation/reputation_pos.gif)
![83Stang5.0](images/reputation/reputation_pos.gif)
![83Stang5.0](images/reputation/reputation_pos.gif)
![83Stang5.0](images/reputation/reputation_highpos.gif)
![83Stang5.0](images/reputation/reputation_highpos.gif)
![83Stang5.0](images/reputation/reputation_highpos.gif)
![83Stang5.0](images/reputation/reputation_highpos.gif)
![83Stang5.0](images/reputation/reputation_highpos.gif)
![83Stang5.0](images/reputation/reputation_highpos.gif)
![Default](images/icons/icon1.gif)
Get up with Steve man, he knows his shit.
They dont call him SID-BUMP for nothin, and I just bought half his most recent setup, you can hear me a mile away no BS.
They dont call him SID-BUMP for nothin, and I just bought half his most recent setup, you can hear me a mile away no BS.
#42
![Default](images/icons/icon1.gif)
what i dont get is what are you going to do with the rings, if you cant cut them out, how do you think you are gonna just start fiber glassing your doors, im in for pics of this train wreck
but i have the tools just not a good enough router, my jig and router wont let me go down that small the smallest i can cut is 7.5 or i would help you out
but i have the tools just not a good enough router, my jig and router wont let me go down that small the smallest i can cut is 7.5 or i would help you out
#43
mr.saltine
Thread Starter
Join Date: Oct 2008
Location: uptown bad newz zone 6
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![Default](images/icons/icon1.gif)
what i dont get is what are you going to do with the rings, if you cant cut them out, how do you think you are gonna just start fiber glassing your doors, im in for pics of this train wreck
but i have the tools just not a good enough router, my jig and router wont let me go down that small the smallest i can cut is 7.5 or i would help you out
but i have the tools just not a good enough router, my jig and router wont let me go down that small the smallest i can cut is 7.5 or i would help you out
#44
mr.saltine
Thread Starter
Join Date: Oct 2008
Location: uptown bad newz zone 6
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![Default](images/icons/icon1.gif)
i shit i beleive em.i done had some badass setups for the last 10 years.i just neva done no blowthru setups. iv always done sealed or ported.
#45
TTTTIIIMMMAAAAAYYY!
Join Date: Nov 2002
Location: Viva Las Vegas
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
![dxplicitone has a spectacular aura about](images/reputation/reputation_pos.gif)
![dxplicitone has a spectacular aura about](images/reputation/reputation_pos.gif)
![Default](images/icons/icon1.gif)
Yeah i have the tools plunger rounter and a few jigs and can rip out rings in no time. But honestly for $10 off ebay they are going to be just as good and the same price i would charge you. I dont like local im in Vegas or id rip them out for you real quick.
Steve- For the smaller cuts on your jig can you not make your own holes on the jig itself with 1/4 drill bit? I did this to make some small ass 4" cuts once and it worked like a champ. Just a thought as its not too hard to just measure out center from your router bit and then tag a new hole in the jig and label it with a sharpie. Save you some money from having to go get another jig for smaller cuts.
And door panels on your balcony? I dont know bout this i gotta see these pics as well, im not tryin to clown i just know that if you dont have the right tools and experience something that is so open to detail like a door panel has to be perfect or you just ruined your shit.
Sorry for the delayed response
Steve- For the smaller cuts on your jig can you not make your own holes on the jig itself with 1/4 drill bit? I did this to make some small ass 4" cuts once and it worked like a champ. Just a thought as its not too hard to just measure out center from your router bit and then tag a new hole in the jig and label it with a sharpie. Save you some money from having to go get another jig for smaller cuts.
And door panels on your balcony? I dont know bout this i gotta see these pics as well, im not tryin to clown i just know that if you dont have the right tools and experience something that is so open to detail like a door panel has to be perfect or you just ruined your shit.
Sorry for the delayed response
Last edited by dxplicitone; 12-21-2009 at 10:13 AM.
#46
mr.saltine
Thread Starter
Join Date: Oct 2008
Location: uptown bad newz zone 6
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![Default](images/icons/icon1.gif)
Yeah i have the tools plunger rounter and a few jigs and can rip out rings in no time. But honestly for $10 off ebay they are going to be just as good and the same price i would charge you. I dont like local im in Vegas or id rip them out for you real quick.
Steve- For the smaller cuts on your jig can you not make your own holes on the jig itself with 1/4 drill bit? I did this to make some small ass 4" cuts once and it worked like a champ. Just a thought as its not too hard to just measure out center from your router bit and then tag a new hole in the jig and label it with a sharpie. Save you some money from having to go get another jig for smaller cuts.
And door panels on your balcony? I dont know bout this i gotta see these pics as well, im not tryin to clown i just know that if you dont have the right tools and experience something that is so open to detail like a door panel has to be perfect or you just ruined your shit.
Sorry for the delayed response
Steve- For the smaller cuts on your jig can you not make your own holes on the jig itself with 1/4 drill bit? I did this to make some small ass 4" cuts once and it worked like a champ. Just a thought as its not too hard to just measure out center from your router bit and then tag a new hole in the jig and label it with a sharpie. Save you some money from having to go get another jig for smaller cuts.
And door panels on your balcony? I dont know bout this i gotta see these pics as well, im not tryin to clown i just know that if you dont have the right tools and experience something that is so open to detail like a door panel has to be perfect or you just ruined your shit.
Sorry for the delayed response
#47
![Default](images/icons/icon1.gif)
well its not as easy as that, but about the router, i have a jasper jig its just the base of my router is to large to get to the other sizes, i need a smaller base to get them and im to broke to get one, but if you need any help i told you i would just call me you should have my number in a pm i sent you
#48
mr.saltine
Thread Starter
Join Date: Oct 2008
Location: uptown bad newz zone 6
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![Default](images/icons/icon1.gif)
Honestly you cant just come on here expecting people to come up with designs on the fly without a couple things my man. You need to know exactly what equipment you will be running, and you need to have them come out and measure up your trunk and work from there. Your talking about porting, push thrus, SP subs, etc etc but you really need some direction is what it sounds like. Start with a product first and work from there at least you will know required space at that point and can get an installer out there taking some measurements for the design. Any good installer be him on this site or not should be able to go from that point and throw a couple things at you for approval. The design your requesting seems pretty simplistic as i was not aware that this is the new "thing", for your style of ride. I recently slapped together a basic install in my RL that pushed thru the rear deck lid of the car, while maintaining my trunk that i need living in Vegas (never know when you got a dead body).
![](http://i236.photobucket.com/albums/ff119/dxplicitone/DSC00187.jpg)
![](http://i236.photobucket.com/albums/ff119/dxplicitone/DSC00216.jpg)
But sounds like sheer brute force is what you are looking for may i suggest and you have the budget let me suggest you look at a few Re Audio XXX's subs as these are pure SP subs, unlike the 8" Re series im running in the install above which are geared more toward SQ. Another nice alternative is Sundown Audio's Nightshade series, i have only had the privledge of installing one of these 12" beasts but let me tell you they will impress. Last but certainly not least is TC Sounds now Audio Pulse Axis line and their LMS-Ultra are something to look into as well, i have only installed a 15" sub in a skiboat once before but i will never forget the performance of such a sub. I mention these subs as you said you have thousands to drop on this system, if you want to compete and move some serious air you need a sub that is built for that reason and really that reason only. We can go on for days rappin off RF T series, Eclipse Titaniums, MTX 9500's blah blah but if you want to get with the big boys you need to get with the right products. Give them a look you will not be sorry, if i lived in Va Beach still id take a look at your ride and put together something for you as it has been at least 2 years since i have built a serious SP monster. Unfortunately im in Vegas so this is not possible but i can at least talk some product with you.
http://www.sundownaudio.com/
http://reaudio.com/home.html
http://www.audiopulse.com/
![](http://i236.photobucket.com/albums/ff119/dxplicitone/DSC00187.jpg)
![](http://i236.photobucket.com/albums/ff119/dxplicitone/DSC00216.jpg)
But sounds like sheer brute force is what you are looking for may i suggest and you have the budget let me suggest you look at a few Re Audio XXX's subs as these are pure SP subs, unlike the 8" Re series im running in the install above which are geared more toward SQ. Another nice alternative is Sundown Audio's Nightshade series, i have only had the privledge of installing one of these 12" beasts but let me tell you they will impress. Last but certainly not least is TC Sounds now Audio Pulse Axis line and their LMS-Ultra are something to look into as well, i have only installed a 15" sub in a skiboat once before but i will never forget the performance of such a sub. I mention these subs as you said you have thousands to drop on this system, if you want to compete and move some serious air you need a sub that is built for that reason and really that reason only. We can go on for days rappin off RF T series, Eclipse Titaniums, MTX 9500's blah blah but if you want to get with the big boys you need to get with the right products. Give them a look you will not be sorry, if i lived in Va Beach still id take a look at your ride and put together something for you as it has been at least 2 years since i have built a serious SP monster. Unfortunately im in Vegas so this is not possible but i can at least talk some product with you.
http://www.sundownaudio.com/
http://reaudio.com/home.html
http://www.audiopulse.com/
#50
mr.saltine
Thread Starter
Join Date: Oct 2008
Location: uptown bad newz zone 6
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_pos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![bos74211](images/reputation/reputation_highpos.gif)
![Default](images/icons/icon1.gif)
Thread
Thread Starter
Forum
Replies
Last Post
92EH3
Interior / Electrical / Car Stereo
0
10-01-2009 04:26 PM
UnityRacing
Other ARCHIVE
11
10-18-2008 08:00 PM
tegboy757
Want to Buy / Trade ARCHIVE
0
12-11-2007 11:39 AM