Turbo B18B1 Oil Feed/Return
#1
Registered User
Thread Starter
Join Date: May 2003
Location: Virginia Beach
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Turbo B18B1 Oil Feed/Return
can a sandwich oil adapter be used instead of drilling a hole and welding the feed/return line in the oil pan?
i know the oil is pressurized when it goes through the adapter, so i'm not sure if it will work with the turbo. i am also pretty sure that oil is not pressurized when it is in the oil pan, so i'm guessing the turbo creates a vacuum to suck the oil up.
think a sandwich adapter will work???
i know the oil is pressurized when it goes through the adapter, so i'm not sure if it will work with the turbo. i am also pretty sure that oil is not pressurized when it is in the oil pan, so i'm guessing the turbo creates a vacuum to suck the oil up.
think a sandwich adapter will work???
#3
Re: Turbo B18B1 Oil Feed/Return
nope wont work....your oil feed line is already pressurized and by connecting the return line to a sandwich which u pretty much answered yourself is pressurized will not allow the oil to drain properly. end result= blowing the turbo seals.....my suggestion is to do it by drilling the oil pan.
#4
Re: Turbo B18B1 Oil Feed/Return
Originally Posted by D_C_4
nope wont work....your oil feed line is already pressurized and by connecting the return line to a sandwich which u pretty much answered yourself is pressurized will not allow the oil to drain properly. end result= blowing the turbo seals.....my suggestion is to do it by drilling the oil pan.
#5
Re: Turbo B18B1 Oil Feed/Return
Originally Posted by bOOsTiNb18b
u can make it as a feed line though right? jus not a return?
if any of u need a feed and return line i have one for sale http://www.dragva.com/forums/showthread.php?t=55113
Thread
Thread Starter
Forum
Replies
Last Post