Focus Dipstick Tube Fell Out
#1
Registered Member
Thread Starter
Join Date: Oct 2005
Location: 757
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
Focus Dipstick Tube Fell Out
Some how the tube came out with the dip stick like nothing was securing it in. I'm wondering what is supposed to secure it in a gasket? RTV? I'm really lost here because the haynes manual tells you to remove it but never tells you how to reinstall. 02 ford focus se
#2
Registered Member
Join Date: May 2004
Location: chesapeake
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Re: Focus Dipstick Tube Fell Out
usually to install it i would put a block of wood on top of the dip stick tube and gently hammer in back into the block/pan mad take a few hammer blows but it will go in there thats what worked for me may not work for you
#4
Registered Member
Join Date: Apr 2005
Location: chesapeake
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Re: Focus Dipstick Tube Fell Out
doesnt the end of your dip stick tube have a lip around it with or without a plastic seal . as long as it has that lip then u jsut find the hole and beat it in like the guy stated above. held in with pressure . alot of ford are that way. a big clue is does the dip stick tube have a mounting bracket to it if it does then it norm mounts to the block some where if not the use the method stated above.
#5
Registered Member
Thread Starter
Join Date: Oct 2005
Location: 757
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
Re: Focus Dipstick Tube Fell Out
No mounting bracket it has a lip around both sides and one side gets bigger but i beleive thats the top. I have beat it but it wont go in.....im screwed
#8
Registered Member
Thread Starter
Join Date: Oct 2005
Location: 757
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
Re: Focus Dipstick Tube Fell Out
yea but its my transportation so any help would be greatly appricated dont really think i can just beat it in thought its a metal lip and its going in metal? i just dont understand how i should go about beating it in
#9
Registered Member
Join Date: Apr 2005
Location: chesapeake
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered Member
Thread Starter
Join Date: Oct 2005
Location: 757
Posts: 992
Likes: 0
Received 0 Likes
on
0 Posts
Re: Focus Dipstick Tube Fell Out
Went up to ford today the guys like it has nothing except a dip stick tube. O yea it is supposed to have a bracket but ill worry about that if i can ever get the tube on. I think that its missing a peice. I know hondas have those little things on the block that help you like up the head and i feel like one of those would work perfectly right now...but like i said the dude at ford was like nothing just tap in