LS/Vtec Questions! (More and more)
#1
Eh...
Thread Starter
Join Date: Apr 2003
Location: Va Beach
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
LS/Vtec Questions! (More and more)
I am going LS/Vtec... Type R head of course...Now for prepping the block and everything else to run the setup right...What do I need to do? Thanks :-P
#2
#3
Ok got the block already I asume & the VTEC Head.
Now you need, JDM Type R pistons and ROds, Vtec oil pump,Vtec water pump, LS or aftermarket head gasket, LS timing belt, Type R
or skunk2 intake manifold, Type R 0r Mugen ECU, Apexi VTEC controller, and I think thats it.
Now you need, JDM Type R pistons and ROds, Vtec oil pump,Vtec water pump, LS or aftermarket head gasket, LS timing belt, Type R
or skunk2 intake manifold, Type R 0r Mugen ECU, Apexi VTEC controller, and I think thats it.
#4
Venuto Ottenga Alcun
Join Date: Nov 2002
Location: Hampton
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Iceman
Ok got the block already I asume & the VTEC Head.
Now you need, JDM Type R pistons and ROds, Vtec oil pump,Vtec water pump, LS or aftermarket head gasket, LS timing belt, Type R
or skunk2 intake manifold, Type R 0r Mugen ECU, Apexi VTEC controller, and I think thats it.
Ok got the block already I asume & the VTEC Head.
Now you need, JDM Type R pistons and ROds, Vtec oil pump,Vtec water pump, LS or aftermarket head gasket, LS timing belt, Type R
or skunk2 intake manifold, Type R 0r Mugen ECU, Apexi VTEC controller, and I think thats it.
Not the way I would really do it but for sure the cheap and easy way...
#5
Eh...
Thread Starter
Join Date: Apr 2003
Location: Va Beach
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Ok pwrvtec, what is your suggestion? I got the money to do whatever I want with it, but I have the LS so I am going to build that. Later on I will get a bigger engine. :-D By then K-series hehe.
#7
Originally posted by Iceman
Ok got the block already I asume & the VTEC Head.
Now you need, JDM Type R pistons and ROds, Vtec oil pump,Vtec water pump, LS or aftermarket head gasket, LS timing belt, Type R
or skunk2 intake manifold, Type R 0r Mugen ECU, Apexi VTEC controller, and I think thats it.
Ok got the block already I asume & the VTEC Head.
Now you need, JDM Type R pistons and ROds, Vtec oil pump,Vtec water pump, LS or aftermarket head gasket, LS timing belt, Type R
or skunk2 intake manifold, Type R 0r Mugen ECU, Apexi VTEC controller, and I think thats it.
#8
Venuto Ottenga Alcun
Join Date: Nov 2002
Location: Hampton
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BlueTegB18A
your incorrect on a few things...type R rods will not fit with the ls crank. also, if your using a vtec water pump then you need a vtec timing belt, which is suggested.
your incorrect on a few things...type R rods will not fit with the ls crank. also, if your using a vtec water pump then you need a vtec timing belt, which is suggested.
#10
Venuto Ottenga Alcun
Join Date: Nov 2002
Location: Hampton
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
All motor. (Cheap)
B18A/B 81mm bore
11.5:1 Forged Pistons
Endyne Eagle rods (MIN) Crower or Manley are best
Aline bore the crank journals
ACL bearings
Z10 or equal crank girdle
Balance everything
VTEC Head non GSR
Port N Polish Blah Blah
Bigger valves
Skunk Manifold
175 - 185 WHP to the wheels with torque
All Motor (Pricey)
B18A/B Sleeved 84.5-85mm
11.5-13:1 Forged Pistons
Crower or Manley Rods
Aline bore the crank journals
ACL bearings
Z10 or equal crank girdle
Balance everything
VTEC Head non GSR
Port N Polish Blah Blah
Bigger valves
Springs
Cams
Skunk Manifold
Bigger TB
230+ WHP With mad torque
Turbo (Cheap)
B18A/B 81mm bore
9:1 Forged Pistons
Endyne Eagle rods (MIN) Crower or Manley are best
Aline bore the crank journals
ACL bearings
Z10 or equal crank girdle
Balance everything
Port N Polish The LS head Blah Blah
Skunk Manifold
Turbo kit Full race
250+ WHP
And the built turbo motor
B18A/B Sleeved 84.5-85mm
9-10.5:1 Forged Pistons
Crower or Manley Rods
Aline bore the crank journals
ACL bearings
Z10 or equal crank girdle
Balance everything
VTEC Head non GSR
Port N Polish Blah Blah
Bigger valves
Springs
Skunk Manifold
Bigger TB
250-500+ with VTEC head
B18A/B 81mm bore
11.5:1 Forged Pistons
Endyne Eagle rods (MIN) Crower or Manley are best
Aline bore the crank journals
ACL bearings
Z10 or equal crank girdle
Balance everything
VTEC Head non GSR
Port N Polish Blah Blah
Bigger valves
Skunk Manifold
175 - 185 WHP to the wheels with torque
All Motor (Pricey)
B18A/B Sleeved 84.5-85mm
11.5-13:1 Forged Pistons
Crower or Manley Rods
Aline bore the crank journals
ACL bearings
Z10 or equal crank girdle
Balance everything
VTEC Head non GSR
Port N Polish Blah Blah
Bigger valves
Springs
Cams
Skunk Manifold
Bigger TB
230+ WHP With mad torque
Turbo (Cheap)
B18A/B 81mm bore
9:1 Forged Pistons
Endyne Eagle rods (MIN) Crower or Manley are best
Aline bore the crank journals
ACL bearings
Z10 or equal crank girdle
Balance everything
Port N Polish The LS head Blah Blah
Skunk Manifold
Turbo kit Full race
250+ WHP
And the built turbo motor
B18A/B Sleeved 84.5-85mm
9-10.5:1 Forged Pistons
Crower or Manley Rods
Aline bore the crank journals
ACL bearings
Z10 or equal crank girdle
Balance everything
VTEC Head non GSR
Port N Polish Blah Blah
Bigger valves
Springs
Skunk Manifold
Bigger TB
250-500+ with VTEC head