plugs?
#1
Registered Member
Thread Starter
Join Date: Jan 2003
Location: Yorktown
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
plugs?
Ok everyone seems to be using NGK Iridiums (mustang drivers)... I was considering some Bosch Platinum 4's but I want everyone else's opinion... what would be the best spark plugs for a 97' stock mustang cobra running 93 octane fuel and right now she's runnin a bit rich but that should be fixed by this weekend (hopefully)... so yea if I go for the NGK's i need to know asap so i can order them... also where's the best/cheapest site to get these?
#7
SOI SOI SOI SOI SOI
Join Date: Nov 2002
Location: Newport News
Posts: 5,683
Likes: 0
Received 0 Likes
on
0 Posts
I ordered mine from sparkplugs.com. I'd suggest that unless you are spraying go with the NGK Iridiums, otherwise go with a slightly colder copper plug.
To all who need to be schooled:
Iridium is a precious metal that is 6 times harder and 8 times stronger than platinum, it has a 1,200=F higher melting point than platinum and conducts electricity better. This makes it possible to create the finest wire center electrode ever. Prior till now, spark plug manufacturers have favored platinum for their long life or performance spark plugs due to its high melting point, also the technology did not exist to machine and bond iridium on a spark plug electrode(at least in a cost effective manner). Champion spark plugs had already made an iridium industrial application spark plug, but it still sells for over a hundred dollars per plug. Just now is the technology available to effectively use iridium in a spark plug for automotive applications. The strength, hardness and high melting point of iridium make it very well suited for a fine wire plug. The primary iridium plug manufacturers at this time are Denso with a 0.4mm center electrode and NGK with a 0.7mm center electrode. Both are the best performance plugs on the market for traditional automotive use and many racing applications.
SIDENOTE: Thus far the tech's we have spoken with report no problems using iridium plugs with Nitrous.
Fine wire center electrode come under a variety of names depending on manufacturer, IETapered point, Ultra-Fine electrode, Taper cut electrode, Necked down electrode). Originally designed to improve starting and reduce fouling in two-stroke engines, this design was found to improve performance in four-stroke engines as well. All operate on primarily the same principle, a spark plug with fine wire electrodes will perform better than a traditional plug. There are two reasons for this, first is because a smaller center electrode requires less voltage to jump the gap. This means fewer misfires, which should be seen in higher mileage and more horsepower. The second reason is smaller center electrodes reduce quenching. The smaller center electrodes have required exotic metals such as platinum or iridium so that they can still maintain (and sometimes surpass) the longevity of a traditional spark plug. Currently the finest wire performance plugs available are made by Denso at 0.4mm diameter and by NGK at 0.7mm diameter, a traditional center electrode is typically 2.0 to 2.5mm.
To all who need to be schooled:
Iridium is a precious metal that is 6 times harder and 8 times stronger than platinum, it has a 1,200=F higher melting point than platinum and conducts electricity better. This makes it possible to create the finest wire center electrode ever. Prior till now, spark plug manufacturers have favored platinum for their long life or performance spark plugs due to its high melting point, also the technology did not exist to machine and bond iridium on a spark plug electrode(at least in a cost effective manner). Champion spark plugs had already made an iridium industrial application spark plug, but it still sells for over a hundred dollars per plug. Just now is the technology available to effectively use iridium in a spark plug for automotive applications. The strength, hardness and high melting point of iridium make it very well suited for a fine wire plug. The primary iridium plug manufacturers at this time are Denso with a 0.4mm center electrode and NGK with a 0.7mm center electrode. Both are the best performance plugs on the market for traditional automotive use and many racing applications.
SIDENOTE: Thus far the tech's we have spoken with report no problems using iridium plugs with Nitrous.
Fine wire center electrode come under a variety of names depending on manufacturer, IETapered point, Ultra-Fine electrode, Taper cut electrode, Necked down electrode). Originally designed to improve starting and reduce fouling in two-stroke engines, this design was found to improve performance in four-stroke engines as well. All operate on primarily the same principle, a spark plug with fine wire electrodes will perform better than a traditional plug. There are two reasons for this, first is because a smaller center electrode requires less voltage to jump the gap. This means fewer misfires, which should be seen in higher mileage and more horsepower. The second reason is smaller center electrodes reduce quenching. The smaller center electrodes have required exotic metals such as platinum or iridium so that they can still maintain (and sometimes surpass) the longevity of a traditional spark plug. Currently the finest wire performance plugs available are made by Denso at 0.4mm diameter and by NGK at 0.7mm diameter, a traditional center electrode is typically 2.0 to 2.5mm.
#8
Registered Member
Thread Starter
Join Date: Jan 2003
Location: Yorktown
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
spark plugs
thanx vm for that wonderful bit of info... i schooled myself awhile ago tho reading it off their site but thats what i was wondering: are their claims true, are these plugs the gods of all other plugs or would it be smarter just to stick with stock plugs? btw I should have some sort of a power adder sometime in the NEAR future (nothing fancy like a blower or nitrous tho)
#9
SOI SOI SOI SOI SOI
Join Date: Nov 2002
Location: Newport News
Posts: 5,683
Likes: 0
Received 0 Likes
on
0 Posts
The big bonus IMO is that these will last a hell of a long time because, unlike platinum, there's no pressed on "tip" that will fall off over time. The entire electrode is solid Iridium, so it should stay carbon free forever.
I'm sure the fine tip electrode will provide a slightly hotter spark, but I doubt it's anything to write home about. When I got mine in there was a slight improvement, but that was probably just because my old plugs were dirty as a mofo (NGK TR6s)
I'm sure the fine tip electrode will provide a slightly hotter spark, but I doubt it's anything to write home about. When I got mine in there was a slight improvement, but that was probably just because my old plugs were dirty as a mofo (NGK TR6s)
#10
Biding time
Join Date: Nov 2002
Location: Watching the Redskins win one?
Posts: 2,275
Likes: 0
Received 0 Likes
on
0 Posts
Re: spark plugs
Originally posted by WillRace4Food
or would it be smarter just to stick with stock plugs? btw I should have some sort of a power adder sometime in the NEAR future (nothing fancy like a blower or nitrous tho)
or would it be smarter just to stick with stock plugs? btw I should have some sort of a power adder sometime in the NEAR future (nothing fancy like a blower or nitrous tho)