JDMDev217

Alright so I've tried to seal these twice and cannot seem to get them not leaking air anyone on here have tips on how to do it and what sealant should be used? Thanks

Dough_Boy.

I just did a friend of mines two weeks ago. I used gray RTV. How long did you let them sit after you put them back together?

JDMDev217

Like 2 days how did you do the bolts cause that's where all mine are leaking is from the back around the bolts not the face though

Dough_Boy.

I pulled them apart and sanded all the old sealant off. Put a small bead on the front and back of the face of the wheel. Then when I tightened the bolts I did all the bolts directly across from the other until they were all tight. Use blue thread lock on the bolts also. After they were all hand tight torque them to 25 ft. lbs. Then I put a bead of RTV where the barrels meet and ran my finger abound the wheel to cover everything up.

JDMDev217

Did you put the rtv between the lip and face and the face and the drum?

Dough_Boy.

Yup,

JDMDev217

And you just put the thread lock straight on the bolts?

Dough_Boy.

After I put them through the wheel yes. Read this, it's where I read to do it.

http://www.wheel-whores.com/forum/vi...php?f=7&t=7249

JDMDev217

Thanks man and you did purred between the pieces cause that says don't but if it won't hurt it to then I'm going to

JDMDev217

Thanks man and you put rtv between the pieces cause that says don't but if it won't hurt it to then I'm going to